For Sale - Installation Tool for Full Flow Float Valves

Post parts wanted or for sale here

Topic author
Scott_Conger
Posts: 6420
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

For Sale - Installation Tool for Full Flow Float Valves

Post by Scott_Conger » Tue Sep 27, 2022 4:43 pm

I have always ONLY sold these to folks who also buy a valve from me. I am presently starting my annual run of parts and tools and will sell five (5) of these tools without the requirement of buying a valve. They fit the Full Flow Float Valve like a glove, as well as some other new manufacture valves from other suppliers. These are case-hardened on their working end and will install a new valve with absolutely no slipping or damage to the valve.

It will NOT fit original Wizard valves as their drive slots are too small and vary wildly in their depth (but who would use an old valve, anyway??)

First 5 persons to email me are eligible to purchase as a one-off purchase. Thank you.

EMAIL ONLY...that's the only way for me to keep track of who/when

Note: I cannot sell/ship fabricated parts to California
IMG_20220927_142008_1CS_2.jpg
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Topic author
Scott_Conger
Posts: 6420
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: For Sale - Installation Tool for Full Flow Float Valves

Post by Scott_Conger » Fri Sep 30, 2022 9:37 am

one bump, and then only available with purchase of a Full Flow Float Valve
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Dan Hatch
Posts: 4101
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: For Sale - Installation Tool for Full Flow Float Valves

Post by Dan Hatch » Fri Sep 30, 2022 10:14 am

Scott: When you going to make tool for mixture jet? Thanks for making these tools. Dan


Topic author
Scott_Conger
Posts: 6420
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: For Sale - Installation Tool for Full Flow Float Valves

Post by Scott_Conger » Fri Sep 30, 2022 11:22 am

already been done, Dan!
dynamite.jpg
dynamite.jpg (7.4 KiB) Viewed 688 times
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Topic author
Scott_Conger
Posts: 6420
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: For Sale - Installation Tool for Full Flow Float Valves

Post by Scott_Conger » Fri Oct 07, 2022 12:06 pm

I have a couple left for individual purchase...purchase now or you'll only be able to buy one WITH a valve
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured

Post Reply Previous topicNext topic