Looking for the driven plate / tail shaft for a 26/27 transmission. I have several, but the shaft OD where the 4th main cap goes are all mangled.
Note: this is the one that does not have a ridge where it connects to the brake drum by bolts. See photo. It measures 7 1/4" across the face.
Email me if you can help me out. Thanks
Brian
26 T speedster
13 T runabout
12 T touring.
WTB 26/27 Transmission Tailshaft
-
Topic author - Posts: 92
- Joined: Fri Jan 22, 2021 12:45 pm
- First Name: Brian
- Last Name: Harlamoff
- * REQUIRED* Type and Year of Model Ts owned: 1913 Runabout, 1922 speedster
- Location: Santa Cruz CA
-
- Posts: 4956
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: WTB 26/27 Transmission Tailshaft
If the shaft is tight to the drive plate and pin holes are good, get it turned down and polished then have Gene French bore a 4th to your size.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup