MTFCA Forum

I have been getting some inquiries about if I will make another run of Stevens Front Axle tooling. So I thought I would put the question out if anyone is interested. The new price will be $475 + shipping for a set.
This run will only be sold as sets, that is a Tapered reamer for the top and a reamer/tap for the bottom.
Sorry no singles.
I will need a minimum of 8 people to commit before I will run another batch. Will also require a deposit before.
Any one interested please send me an email to address in pictures. Thanks Dan
Tapered reamer Reamer/Tap

Back to the top

One person put name in . Only 7 more needed. Thanks Dan

These tools are top notch and turn a spare Stevens frame into a real tool. I bought Dan's first tools and have ordered spares for when they eventually become impossible to find (again!)

thanks Dan

Now there are 2, need 6 more. Thanks Dan

Then are we’re 3, need 5 more to make this happen., thanks to you guys. Dan

Now got 4 need 4 more. Thanks Dan

Back to the top

Five people have signed up. Need 3 more. Thanks Dan

Now have six. If I get two more this can happen. Thanks Dan

Back to the top need 2 more to make this happen thanks Dan

These items are really well done and are a must have for your front axle repair but more importantly for safety. I have bought 2 sets already. Any club or group of friends should consider purchasing the set. You’ll be surprised how many friends will call you after you’re set up to repair the front axle. Dan thanks again for considering the run for the tooling. Dan may have not mentioned this but you can go to YouTube to view the tools in an actual repair.
https://youtu.be/7DNGT7P79vg

Still looking for a couple more people interested. Email me at address in pictures. Thanks Dan

I'm thinking! Hard part is coughing up for the frame too. Plus, after I have Jack fix my Torpedo axle next week (with Dan's inserts), all my axles have been repaired.

Bite the bullet Tim. You’ll be glad you did.

Now have 6 need one more. Thanks Dan

Sent you an email Dan. I will take a set of the reamers. Thanks.

Back to the top

Anyone interested needs to sign up.
Prices will be posted Monday.

Back to the top

Back to the top

In production. Should be ready in December.
Email me at address in pictures if interested.

Have a few not spoken for get now while you can

Back to the top

Back to the top

Back to the top

Back to the top
If you need one better get on the list

Back to the top

Back to the top

Back to the top

Back to the top

Back to the top

Tapered reamer done almost done with the reamer/taps.
If you need a set better get on list. Very few sets left.

Back to the top