(Sold, pending) These are best suited for someone who has the skills to successfully use them…. These were in an engine that had gotten rusty in the bores. Not tight, but pretty sticky. Some rings are in them and didn’t expand out so I assume they are stuck. Rings will require removing as well as cleaning of the grooves. I haven’t tried prying on them. The pins were a light press fit out but aren’t rusty, so the pin holes will require honing. One piston is dented in on the rim of the skirt (you can see it in the photo).
So… These might be a good deal for someone who needs one or two, or for someone that can re-machine them for something else, or just rehab & drop into a ratty engine. They are $25 plus shipping. Shipping will probably be $14 to $24 depending on where you live. Email if you want them. Include your address so I can figure shipping. Don't post here or send a pm. Thanks!
Set of used .060” pistons (Sold, pending)
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Set of used .060” pistons (Sold, pending)
Last edited by Adam on Sat Dec 10, 2022 2:58 pm, edited 3 times in total.
-
- Posts: 238
- Joined: Sun Jan 06, 2019 12:09 pm
- First Name: Philip
- Last Name: Thompson
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Graham NC
Re: Set of used .060” pistons for sale
i will take them. philip
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
-
- Posts: 244
- Joined: Tue Jan 08, 2019 8:29 pm
- First Name: Bill
- Last Name: Everett
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring, 1914 Touring, 1912 Roadster PickUp in process
- Location: Collierville, TN
- MTFCA Number: 93
- MTFCA Life Member: YES
- Board Member Since: 2011
-
- Posts: 244
- Joined: Tue Jan 08, 2019 8:29 pm
- First Name: Bill
- Last Name: Everett
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring, 1914 Touring, 1912 Roadster PickUp in process
- Location: Collierville, TN
- MTFCA Number: 93
- MTFCA Life Member: YES
- Board Member Since: 2011
Re: Set of used .060” pistons (Sold, pending)
E-mail sent.
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Set of used .060” pistons (Sold, pending)
Bill Everett: THEY HAVE BEEN SOLD. I did see your two posts here of “email sent” and I did receive the two emails you sent yesterday afternoon and the one you sent this morning saying you want them. I responded to your first email yesterday telling you they were sold. I am sorry, but they were already sold before you contacted me. Thank you.