Set of used .060” pistons (Sold, pending)
Posted: Fri Dec 09, 2022 1:07 pm
(Sold, pending) These are best suited for someone who has the skills to successfully use them…. These were in an engine that had gotten rusty in the bores. Not tight, but pretty sticky. Some rings are in them and didn’t expand out so I assume they are stuck. Rings will require removing as well as cleaning of the grooves. I haven’t tried prying on them. The pins were a light press fit out but aren’t rusty, so the pin holes will require honing. One piston is dented in on the rim of the skirt (you can see it in the photo).
So… These might be a good deal for someone who needs one or two, or for someone that can re-machine them for something else, or just rehab & drop into a ratty engine. They are $25 plus shipping. Shipping will probably be $14 to $24 depending on where you live. Email if you want them. Include your address so I can figure shipping. Don't post here or send a pm. Thanks!
So… These might be a good deal for someone who needs one or two, or for someone that can re-machine them for something else, or just rehab & drop into a ratty engine. They are $25 plus shipping. Shipping will probably be $14 to $24 depending on where you live. Email if you want them. Include your address so I can figure shipping. Don't post here or send a pm. Thanks!