Page 1 of 1
FS 1915 clincher wheels
Posted: Fri Jan 13, 2023 9:53 am
by Scott Rosenthal
FS 1915 front and wheel wood spoked wheels with 3 inch front and 3.5 inch rear clincher rims, and hubs. Wood spokes are trash, but were previousl usable for a roller project. Sold as the set only, 400.00 plus S/H. 513 three seven eight 4235.
Re: FS 1915 clincher wheels
Posted: Fri Jan 13, 2023 4:23 pm
by Scott Rosenthal
Reduced to 300.00
Re: FS 1915 clincher wheels
Posted: Sun Jan 15, 2023 7:20 am
by Scott Rosenthal
These are good usable.parts with exveption of the front hubs that need new bearings. Rims cost 800.00 new useable hubs will be available at Chicasha cost 200.00. Yes,you will get stung on the shipping unless you know someone near Cinti Oh who can transport them.
Re: FS 1915 clincher wheels
Posted: Sun Jan 15, 2023 11:13 am
by Walt Wise
This is just my personal opinion here, but I would think that some pics might help with your sale here and that sort of goes with anything someone is wanting to sell on this site. Here again, but this is just me, I hardly buy anything I can't see first, preferably in person, but surely at least after viewing a picture of it - whatever it is...just saying and not meaning to offend anyone....
Re: FS 1915 clincher wheels
Posted: Sun Jan 15, 2023 1:45 pm
by Scott Rosenthal
Note where I've noted that my access is not working properly and not able to post photos, so I've provided the text number for anyone interested. A bonus has been fewer tire kickers when extra effort is required
Scott
Re: FS 1915 clincher wheels
Posted: Sun Jan 15, 2023 2:01 pm
by JTT3
For Scott. Hope this helps.
Re: FS 1915 clincher wheels
Posted: Sun Jan 15, 2023 2:16 pm
by Scott Rosenthal
Tires and tubes were trashed. Edges are good, and did not roll these around without the rubber protecting them.
Thx
Scott
Re: FS 1915 clincher wheels
Posted: Tue Jan 24, 2023 5:51 pm
by Scott Rosenthal
Rims and hubs no longer available. Thx MTFCA.