Page 1 of 1

Wanted: Wood Plans - '23 - '25 Runabout

Posted: Tue Jan 17, 2023 7:10 pm
by RajoRacer
Helping a fella locate wood plans for a later Runabout - I had a collection of Miller plans but alas, I must have sold it or borrowed it out and it never came back !

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Tue Jan 17, 2023 10:48 pm
by Perry Goble
I have a set of wood plans says 1914 to 1925 roaster and touring . i put new wood in a 24 roaster years ago using these plans . plans still look new . 100.00 .plus shipping

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Wed Jan 18, 2023 8:15 am
by BRENT in 10-uh-C
Perry Goble wrote:
Tue Jan 17, 2023 10:48 pm
I have a set of wood plans says 1914 to 1925 roaster and touring . i put new wood in a 24 roaster years ago using these plans . plans still look new . 100.00 .plus shipping
Perry/Steve, I have sent you both an email.

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Wed Jan 18, 2023 11:39 am
by Perry Goble
The plains I have say 23 / 25 roadster on the pages . there are 8 large pages 28 / 18 and 5 small pages 8 / 11 with 1914 / 25 roadsters and touring at the top . I can not find a name on the plans .

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Wed Jan 18, 2023 11:44 am
by RajoRacer
Thanks Fellas !

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Wed Jan 18, 2023 12:11 pm
by Original Smith
Steve: The 1925's are quite different than the 23-24's. They called these the wide cowl body, and have quite a bit of metal where the wood used to be.
Ford even made a new design floor mat for these. I sure would like to find an original, but have never been able to.

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Wed Jan 18, 2023 1:05 pm
by RajoRacer
Thanks Larry - I sold my "true" '25 Runabout project a few years ago - too many T's already !

Re: Wanted: Wood Plans - '23 - '25 Runabout

Posted: Thu Jan 26, 2023 1:32 pm
by RajoRacer
BTT - Perry - been attempting contact regarding the wood plans - drop me a note, please.