13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
These are for the Pinion Bearing Bolts. Special size not available at hardware store.
Please use email address in picture, not PM
Taps are done! Sending out totals
I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an email at address in pictures.
I do not have a price yet. Will need at least 25 orders to make this happen. Thanks Dan I have started a run of these. If you are on the list please send an email to address in pictures with your name and address.
If you want on the list do the same. There are some extra at this time. The price is $55.00 each + shipping.,Thanks Dan
Here is picture from last batch, these will be just like the old ones. Plug tap.
Please use email address in picture, not PM
Taps are done! Sending out totals
I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an email at address in pictures.
I do not have a price yet. Will need at least 25 orders to make this happen. Thanks Dan I have started a run of these. If you are on the list please send an email to address in pictures with your name and address.
If you want on the list do the same. There are some extra at this time. The price is $55.00 each + shipping.,Thanks Dan
Here is picture from last batch, these will be just like the old ones. Plug tap.
Last edited by Dan Hatch on Thu Mar 23, 2023 12:29 pm, edited 8 times in total.
-
- Posts: 448
- Joined: Sun Jan 06, 2019 11:27 am
- First Name: Joe
- Last Name: Kowalczyk
- * REQUIRED* Type and Year of Model Ts owned: 1918 Speedster, 1913 Runabout, 1923 Roadster, 1912 Mother-in-law roadster
- Location: - Kuna, Idaho
- MTFCA Number: 49558
- Board Member Since: 2017
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Dan, I will now buy 3, been asking local club members
Last edited by havnfun on Sat Feb 18, 2023 9:02 pm, edited 1 time in total.
Regards,
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Back to the top
-
- Posts: 92
- Joined: Fri Jan 22, 2021 12:45 pm
- First Name: Brian
- Last Name: Harlamoff
- * REQUIRED* Type and Year of Model Ts owned: 1913 Runabout, 1922 speedster
- Location: Santa Cruz CA
Re: 13/32 X 16 TPI tap Pinion bearing bolts
I would buy one. Thanks Brian
-
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Re: 13/32 X 16 TPI tap Pinion bearing bolts
I would take one. Tim
-
- Posts: 63
- Joined: Mon Jan 21, 2019 10:00 pm
- First Name: Tom
- Last Name: Leroux
- Location: Long Beach CA
- MTFCA Number: 20412
- Board Member Since: 2010
Re: 13/32 X 16 TPI tap Pinion bearing bolts
I will buy one
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts
That makes 5. Anyone else?
-
- Posts: 3840
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- MTFCA Number: 14383
- Board Member Since: 2020
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Possibly. Any cost estimate? Range?
-
- Posts: 144
- Joined: Sun Jan 06, 2019 7:53 pm
- First Name: Charlie
- Last Name: Coleman
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT C Cab Stakebed Truck
- Location: Redwood Valley, Ca.
- MTFCA Number: 51002
- Board Member Since: 2018
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Dan, thanks for getting these made, I’ll take of
them also. Best Regards Charlie
them also. Best Regards Charlie
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Last ones made ran $40 each, but that was 2020. I will just have to see. Once I get to the 25 I will get price and post.
-
- Posts: 39
- Joined: Sun Jan 06, 2019 4:29 pm
- First Name: Steve
- Last Name: Bender
- * REQUIRED* Type and Year of Model Ts owned: 1923 auto polo car
- Location: Sedgwick, KS
Re: 13/32 X 16 TPI tap Pinion bearing bolts
I would take one
-
- Posts: 3327
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- MTFCA Number: 31705
- Board Member Since: 2001
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Put me down for 10 if you can still get them at $40.00. If not, let me know how much and we'll go from there.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts
I will see about getting a price on a run next week. Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
I now have a current price for a new batch of these taps.
Yes there is a price increase, what hasn’t.
Price will $55.00 each + shipping.
Still need 25 ordered before I can make this happen. Let me if anyone wants one. Thanks Dan.
Yes there is a price increase, what hasn’t.
Price will $55.00 each + shipping.
Still need 25 ordered before I can make this happen. Let me if anyone wants one. Thanks Dan.
-
- Posts: 448
- Joined: Sun Jan 06, 2019 11:27 am
- First Name: Joe
- Last Name: Kowalczyk
- * REQUIRED* Type and Year of Model Ts owned: 1918 Speedster, 1913 Runabout, 1923 Roadster, 1912 Mother-in-law roadster
- Location: - Kuna, Idaho
- MTFCA Number: 49558
- Board Member Since: 2017
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Dan, I’m still good for buying 3 at $55 each
Regards,
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Is everyone in at this price or do you want to pull out.
Still need some more to sign up for this to happen. Let me know. Thanks Dan
Still need some more to sign up for this to happen. Let me know. Thanks Dan
-
- Posts: 107
- Joined: Fri Nov 05, 2021 2:11 pm
- First Name: steven
- Last Name: davidson
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Roselle NJ
- MTFCA Number: 51591
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
I'll take one Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Need a few more to make this happen.
-
- Posts: 3327
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- MTFCA Number: 31705
- Board Member Since: 2001
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Hi Dan,
If it helps get you over the minimum, I'll still take 10.
If it helps get you over the minimum, I'll still take 10.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Thanks, still need few more. Anyone wants one better sign up . Dan
-
- Posts: 118
- Joined: Sun Jan 06, 2019 6:05 pm
- First Name: Lester
- Last Name: Husted
- * REQUIRED* Type and Year of Model Ts owned: 20
- Location: Idaho Falls, ID
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Dan:
I will take 1 also Mike Husted thanks
I will take 1 also Mike Husted thanks
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
I think we are at 21, have to count up. Anyone else want one to get this done?
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Back to the top. Need 2 more
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Still need a few more %
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Got one more, anyone else want one?
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
One last time
-
- Posts: 1285
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Dan I'll take one.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI tap Pinion bearing bolts Price Added
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Back to the top
-
- Posts: 1399
- Joined: Mon Jan 07, 2019 9:59 am
- First Name: Jay
- Last Name: Buscio
- * REQUIRED* Type and Year of Model Ts owned: 1913 speedster 1915 roadster pickup 1915 touring, 1927 speedster
- Location: Sacramento Ca.
- MTFCA Number: 49997
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
It would help if you stated what the tap is used for.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Sorry thought that people were following this thread. I changed the title, but I just added a description.
If anyone wants one better get one. Thanks Dan
If anyone wants one better get one. Thanks Dan
-
- Posts: 25
- Joined: Mon Jan 07, 2019 6:30 pm
- First Name: Simon
- Last Name: Bayley
- * REQUIRED* Type and Year of Model Ts owned: 1925 Ford tourer
- Location: Australia
- MTFCA Number: 52681
- Board Member Since: 2015
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Hi Dan - I will take one as well.... Cheers Simon
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Simon : Please send me an email to address in picture. DO NOT USE PM, they get lost.
Including your address please. Thanks Dan
Including your address please. Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
If you are listed here you need to send me email so you don’t miss out.
-
- Posts: 7
- Joined: Mon Jun 28, 2021 12:39 am
- First Name: Neil
- Last Name: Dobson
- * REQUIRED* Type and Year of Model Ts owned: 5
- Location: New Zealand
- MTFCA Number: 29351
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Hi Dan
I would certainly take one if they are still available.
Regards
Neil Dobson
I would certainly take one if they are still available.
Regards
Neil Dobson
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Neil please send email to address in picture. Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Still need address of people that said they wanted taps
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
Back to the top
-
- Posts: 107
- Joined: Sun Jan 06, 2019 1:57 pm
- First Name: john
- Last Name: hardiman
- * REQUIRED* Type and Year of Model Ts owned: 26 coupe
- Location: stoughton, ma
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
What does one of these taps look like, long, short w/wo handle, through or bottom tap? Have not worked on pinion yet!
-
- Posts: 27
- Joined: Thu Jan 17, 2019 11:51 am
- First Name: Mike
- Last Name: Fortney
- * REQUIRED* Type and Year of Model Ts owned: 1917 model t touring 1917 model tt
- Location: Oskaloosa Iowa
- Board Member Since: 2018
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT
I’ll take one Thank you
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT picture added
Mike please email me at address in pictures.
Picture added of last batch, new batch will be same. Thanks Dan
Picture added of last batch, new batch will be same. Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT picture added
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT picture added
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT picture added
Back to the top. If you want one better get on the list. Almost ready.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT picture added
Still have some available. If you want one let me know. Email me at address in pictures. Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 39
- Joined: Sat Feb 11, 2023 4:54 pm
- First Name: Kevin
- Last Name: Gibbons
- * REQUIRED* Type and Year of Model Ts owned: 1925 Coupe
- Location: Colorado Springs
- MTFCA Number: 52479
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
I will buy one. Thanks!
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Please send me a email with your address to address in the picture. Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 159
- Joined: Fri Jun 05, 2020 7:48 pm
- First Name: Tim
- Last Name: Dickson
- * REQUIRED* Type and Year of Model Ts owned: 1912 speedster 1911 Torepdo
- Location: wi
- MTFCI Number: 17002
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Are they still Available? I would take one
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Email me at address in pictures. I have some extra taps available.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 448
- Joined: Sun Jan 06, 2019 11:27 am
- First Name: Joe
- Last Name: Kowalczyk
- * REQUIRED* Type and Year of Model Ts owned: 1918 Speedster, 1913 Runabout, 1923 Roadster, 1912 Mother-in-law roadster
- Location: - Kuna, Idaho
- MTFCA Number: 49558
- Board Member Since: 2017
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Dan,
Taps I ordered arrived today, thnx for getting these made.
Taps I ordered arrived today, thnx for getting these made.
Regards,
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
Joe Kowalczyk - 1923 Roadster, 1913 Runabout, 1918 Speedster, 1912 Mother-in-law roadster
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Glad you got them. Thanks Dan.
Any one who wants one better order soon.
Any one who wants one better order soon.
-
- Posts: 3327
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- * REQUIRED* Type and Year of Model Ts owned: 1911 Speedster, 1927 Lake Roadster
- Location: Lake Elsinore
- MTFCA Number: 31705
- Board Member Since: 2001
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Taps received. Excellent quality as always! Thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 1285
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Dan, The tap arrived today. Very nice as usual. Thanks for having them made.
.....
.....
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 144
- Joined: Sun Jan 06, 2019 7:53 pm
- First Name: Charlie
- Last Name: Coleman
- * REQUIRED* Type and Year of Model Ts owned: 1926 TT C Cab Stakebed Truck
- Location: Redwood Valley, Ca.
- MTFCA Number: 51002
- Board Member Since: 2018
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Payment sent on Friday, thanks again Dan for
having these made for us all.
having these made for us all.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Thanks.
Still have some, if you want one better act soon.
Still have some, if you want one better act soon.
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Mine arrived today,
Thank you,
Scott
Thank you,
Scott
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Still have some left. Will bring to Luray if any are still available.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
- Posts: 365
- Joined: Thu Jan 17, 2019 11:52 am
- First Name: David
- Last Name: Menzies
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring and 1915 Touring both Canadian models
- Location: British Columbia
- MTFCA Number: 27825
- Board Member Since: 2012
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
In the day there were complete sets made oversize, I have a few but not a complete set, they sometimes show up at swap meets. They are listed different, mine are the nominal + 1/32" eg 3/8 + 1/32.
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top. Still have some
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Back to the top
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Have a few left
-
- Posts: 159
- Joined: Fri Jun 05, 2020 7:48 pm
- First Name: Tim
- Last Name: Dickson
- * REQUIRED* Type and Year of Model Ts owned: 1912 speedster 1911 Torepdo
- Location: wi
- MTFCI Number: 17002
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
got mine last night thank you Dan.
-
- Posts: 107
- Joined: Fri Nov 05, 2021 2:11 pm
- First Name: steven
- Last Name: davidson
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Roselle NJ
- MTFCA Number: 51591
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Got mine, thanks Dan
-
Topic author - Posts: 4112
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Very few left, if I still have any I will bring to Luray. But you better make arrangements to be sure you get one.