Page 1 of 1
WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Sun May 07, 2023 12:10 pm
by Bruce Compton
Wanting to buy a brass dog-bone rad cap with a working brass bodied moto-meter for my '14. New, or nice used with patina is fine. Thanks in advance : Bruce
Re: WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Sun May 07, 2023 1:32 pm
by dinosbunny
91407P Radiator Cap, Dog Bone Style, Polished Brass with Hole get it at California custom roadster I believe it $25.00. they also have moto meters.
Re: WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Sun May 07, 2023 8:40 pm
by Mark Chaffin
Hi Bruce. We have them. Give Dave a call at the garage. 951 226 7331
Re: WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Mon May 08, 2023 1:58 am
by Allan
Most reproduction dogbone radiator caps are of finer construction than any original old time one I have seen. The old time castings are also not as consistent, having varying dimensions in the arms and ball ends. That's OK if is not a concern to you. Less weight on the radiator neck might also be a good thing.
Allan from down under.
Re: WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Tue May 09, 2023 5:56 pm
by TRDxB2
I have a used Jr. Size Model T brass radiator cap -email if interested. Heavy cast brass that may likely was nickle/chrome plated. Note in the lower photo the bone one the right (4" -6") is slightly bent.
Re: WTB .. Looking for a brass dogbone rad cap and working moto-meter
Posted: Tue May 09, 2023 6:24 pm
by Allan
That's a nice one Frank.
Allan from down under.