MTFCA Forum

Posted: **Thu Jun 15, 2023 4:37 pm**

Just finished a new run of Upper and Lower Stevens Front Axle Inserts. Sorry, but yes there is a price increase.
Upper Tapered Inserts $4.25 each
Lower Threaded Inserts $6.25 each
All + shipping. Email me by forum.Not by PM. Thanks Dan

Posted: **Fri Jun 16, 2023 10:32 pm**

Back to the top

Posted: **Sun Jun 18, 2023 8:17 am**

Back to the top

Posted: **Wed Jun 21, 2023 5:28 am**

Back to the top

Posted: **Fri Jun 23, 2023 12:09 pm**

Back to the top

Posted: **Mon Jun 26, 2023 1:56 pm**

Back to the top

Posted: **Wed Jun 28, 2023 1:59 pm**

Back to the top

Posted: **Fri Jun 30, 2023 9:21 pm**

Back to the top

Posted: **Sun Jul 02, 2023 4:17 pm**

Back to the top

Posted: **Wed Jul 05, 2023 5:39 am**

Back to the top

Posted: **Sat Jul 08, 2023 5:01 am**

Back to the top

Posted: **Mon Jul 10, 2023 5:35 am**

Back to the top

Posted: **Sun Jul 16, 2023 4:04 pm**

If you need any better get them soon

Posted: **Fri Jul 21, 2023 12:04 pm**

Better get you some.

Posted: **Mon Jul 24, 2023 10:31 pm**

Back to the top

Posted: **Mon Jul 31, 2023 3:13 pm**

Back to the top

Posted: **Mon Aug 07, 2023 7:24 am**

Back to the top

Posted: **Sat Aug 19, 2023 3:27 am**

Back to the top

Posted: **Fri Aug 25, 2023 4:47 am**

Back to the top

Posted: **Sat Aug 26, 2023 9:12 pm**

Back to the top

Posted: **Mon Aug 28, 2023 8:32 pm**

Back to the top

Posted: **Wed Aug 30, 2023 4:33 am**

Back to the top

Posted: **Thu Aug 31, 2023 3:29 pm**

Back to the top

Posted: **Sun Sep 03, 2023 11:53 am**

Back to the top

Posted: **Tue Sep 05, 2023 1:24 pm**

Back to the top

Posted: **Thu Sep 07, 2023 5:17 am**

Back to the top

Posted: **Fri Sep 15, 2023 4:07 am**

Back to the top

Posted: **Sun Sep 17, 2023 6:08 pm**

Will have at Hershey

Posted: **Wed Sep 20, 2023 4:09 pm**

Back to the top

Posted: **Sat Sep 23, 2023 3:07 am**

Back to the top

Posted: **Thu Oct 12, 2023 7:09 am**

Back to the top

Posted: **Thu Oct 12, 2023 10:32 pm**

Maybe an explaination of what that is would help?

Posted: **Fri Oct 13, 2023 2:51 am**

If a picture is worth a thousand words, what is a video worth?
Here is a link to the Stevens Front Axle Tool in action. Thanks to Bill for making it years ago. Join his YouTube channel.
https://www.youtube.com/watch?v=7DNGT7P79vg

Posted: **Mon Oct 16, 2023 2:16 pm**

Back to the top

Posted: **Tue Oct 17, 2023 7:25 am**

Back to the top

Posted: **Wed Oct 18, 2023 6:24 pm**

Back to the top

Posted: **Sun Oct 22, 2023 12:44 pm**

Back to the top

Posted: **Tue Oct 24, 2023 2:33 pm**

Back to the top

Posted: **Mon Nov 13, 2023 10:20 pm**

Back to the top

Posted: **Sun Nov 26, 2023 7:42 pm**

Back to the top

Posted: **Tue Dec 19, 2023 6:08 pm**

Back to the top

Posted: **Sat Dec 23, 2023 3:11 am**

Back to the top

Posted: **Thu Dec 28, 2023 12:46 pm**

Back to the top

Posted: **Sun Dec 31, 2023 8:18 pm**

Back to the top

Posted: **Tue Jan 02, 2024 9:49 am**

Back to the top

Posted: **Sat Jan 06, 2024 1:52 pm**

Time to move to top

Posted: **Mon Jan 08, 2024 7:20 am**

Back to the top

Posted: **Wed Jan 10, 2024 4:06 pm**

Get you some

Posted: **Sat Jan 13, 2024 8:08 pm**

Back to top

Posted: **Mon Jan 15, 2024 3:14 am**

Back to the top

Posted: **Tue Jan 16, 2024 5:06 am**

Back to the top

Posted: **Wed Jan 17, 2024 11:31 pm**

Back to the top

Posted: **Sat Jan 20, 2024 8:23 pm**

Back to the top

Posted: **Wed Jan 24, 2024 7:12 pm**

Back to the top

Posted: **Sat Jan 27, 2024 3:29 am**

Back to the top

Posted: **Sat Jan 27, 2024 7:43 pm**

H i Dan,
Is it true that no one is making the cast fixture for the reamer & tap reamer anymore? If so are there any drawings of them that one could be
made from by other means?
Craig.

Posted: **Sat Jan 27, 2024 8:17 pm**

On the old forums there is thread where someone made a fixture by welding one up. This was before the reproduction ones. Dan

Posted: **Mon Jan 29, 2024 7:12 pm**

Back to the top

Posted: **Wed Jan 31, 2024 5:26 am**

Back to the top

Posted: **Wed Jan 31, 2024 2:51 pm**

Here’s a link to the old post about home made tool with some dimensions.
https://www.mtfca.com/discus/messages/4 ... 23279.html

Posted: **Sat Feb 03, 2024 1:19 am**

Back to the top

Posted: **Tue Feb 06, 2024 1:07 am**

Back to the top

Posted: **Tue Feb 13, 2024 4:36 pm**

Back to the top

Posted: **Tue Apr 02, 2024 11:34 am**

Back to the top

Posted: **Wed Apr 03, 2024 11:57 am**

Back to the top

Posted: **Thu Apr 04, 2024 10:55 am**

Back to the top

Posted: **Thu May 02, 2024 10:18 am**

Back to top

Posted: **Sat May 18, 2024 3:05 pm**

Back to the top, if you need any of these in future better get them.

Posted: **Sat May 25, 2024 3:07 pm**

Back to the top

Posted: **Sat May 25, 2024 4:57 pm**

Hi Dan could I get 6 of each

Posted: **Sat May 25, 2024 5:02 pm**

E mail sent

Posted: **Tue May 28, 2024 10:08 pm**

please order me
8 upper
4 lower
tom leroux
tomhoistserviceinc@gmail.com

Posted: **Wed May 29, 2024 4:23 am**

Tom send me an email to the email address in pictures. Thanks Dan

Posted: **Sat Jun 01, 2024 2:57 pm**

Back to the top

Posted: **Mon Jun 03, 2024 8:29 am**

Back to the top

Posted: **Tue Jun 04, 2024 9:50 pm**

Back to the top

Posted: **Fri Jun 07, 2024 7:38 pm**

Back to the top

Posted: **Sun Jun 09, 2024 12:56 am**

Back to the top

Posted: **Tue Jun 11, 2024 11:17 pm**

Still have some but supply is getting smaller

Posted: **Sat Jun 15, 2024 5:49 am**

Just shipped out 50 of each. Supply is getting less and less.

Posted: **Thu Jun 20, 2024 5:26 am**

Back to the top

Posted: **Sun Jun 30, 2024 7:44 pm**

Back to the top

Posted: **Fri Jul 12, 2024 12:47 pm**

Back to the top

Posted: **Thu Jul 18, 2024 1:27 pm**

Back to the top

Posted: **Fri Jul 19, 2024 3:12 pm**

Back to the top

Posted: **Tue Jul 30, 2024 3:09 pm**

Back to the top

Posted: **Fri Aug 02, 2024 3:45 am**

Back to the top

Posted: **Sat Aug 10, 2024 10:38 pm**

Back to top again

Posted: **Wed Aug 14, 2024 1:06 pm**

Back to the top

Posted: **Sat Aug 17, 2024 2:18 pm**

Back to the y

Posted: **Wed Aug 21, 2024 5:47 am**

Back to top

Posted: **Fri Aug 30, 2024 1:10 pm**

Back to the top

Posted: **Tue Dec 03, 2024 10:52 am**

Still have. Some

Posted: **Thu Dec 05, 2024 3:30 pm**

Back to the top

Posted: **Thu Feb 27, 2025 8:47 pm**

Back to the top

Posted: **Tue Mar 04, 2025 3:26 am**

Back to the top

Posted: **Sat Mar 08, 2025 3:49 pm**

Back to the top

Posted: **Mon Mar 10, 2025 2:47 pm**

Back to the top

Posted: **Thu Mar 13, 2025 5:35 pm**

Back to the top

Posted: **Tue Mar 18, 2025 8:36 pm**

Back to the top

MTFCA Forum

New batch of Stevens Front Axle insert ready FS

New batch of Stevens Front Axle insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch if Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens insert ready FS

Re: New batch of Stevens Front Axle insert ready FS