MTFCA Forum

Time to venture back to the shed and dig through those wire wheels sitting there. I have one Frayer / Phelps dental drive and looking to swap for PASCO. Wheel centre is OK rim fair. The hub has damage with a build up of brazing to repair it. Figure to swap at fall Hershey as any kind of shipping for these things is getting pricey.

How many teeth does the wheel and hub have ? -Dusty

I don’t recall ever seeing a Frayer brand wheel… but the hub does not appear to be Phelps to me (unless there were variations that I have not seen yet). Here is a Phelps hub for a T that I recreated years ago. The front hubs have no splines

Hi,

1) there are 36 teeth on the hub.

2) Included is a photo of the Frayer / Phelps hub cap.

The front hub that Kevin shows at the very top of this advert is from a Frayer. The wheel nut he just posted screws onto the hub and there is a special wire spring finger on the wire wheel that engages onto the outer teeth of the wheel nut.

Very interesting! A Frayer wheel… by Phelps. While having obviously similar interface designs, Frayer has a relatively conventional threaded wheel nut, while the Phelps has a bolt on cover plate to retain the wheel. Learned sumpin new today! Thanks fellas!

Starting to pack for Hershey. Any trades out there?

Loading for Hershey 2024. Any trades?