Fs ruckstell parts pile

Post parts wanted or for sale here

Topic author
Karl Von Neumann
Posts: 96
Joined: Thu Jan 06, 2022 10:52 am
First Name: Karl
Last Name: VonNeumann
* REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
Location: Pleasant prairie Wisconsin
MTFCA Number: 52955
Board Member Since: 2022

Fs ruckstell parts pile

Post by Karl Von Neumann » Wed Jan 10, 2024 5:27 pm

Ruckstell parts just about a whole diff here the housing would need work need a tube. The guts are decent used the sliding clutch shows wear as well as the stock side of the carrier. Bearing needs replacing $800 plus the ride from pleasant prairie wisconsin or local pickup.

Would consider trading for 1913 parts building a speedster going to need alot of smalls and specific stuff
Attachments
20240110_162221.jpg
17049254035368844460801629156460.jpg
Please hold the other 6 voices are taking a vote


Ken Buhler
Posts: 416
Joined: Mon Jan 21, 2019 4:14 pm
First Name: Ken
Last Name: Buhler
* REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
Location: Kelowna B.C.
MTFCA Number: 49471
Board Member Since: 2012

Re: Fs ruckstell parts pile

Post by Ken Buhler » Thu Jan 11, 2024 12:51 am

Hello Karl,
A Ruckstell needs to be precise and tight. It can be very costly to build a dependable one. I have five Ruckstell gear carriages apart on my bench and I am using micrometers and calipers to determine the precise measurements of each part so that I will know which parts to replace. Looking at what you are showing is like looking at a car going by in a parade. If you could provide measurements of the critical wear areas, it would be helpful.
Work honestly
Stay true to your word
Get the job done right


Topic author
Karl Von Neumann
Posts: 96
Joined: Thu Jan 06, 2022 10:52 am
First Name: Karl
Last Name: VonNeumann
* REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
Location: Pleasant prairie Wisconsin
MTFCA Number: 52955
Board Member Since: 2022

Re: Fs ruckstell parts pile

Post by Karl Von Neumann » Thu Jan 11, 2024 10:19 am

Ken if I had bule print or measurement I would be able to post that's info I also have several ruckstells I'm going thru as well
Please hold the other 6 voices are taking a vote


Topic author
Karl Von Neumann
Posts: 96
Joined: Thu Jan 06, 2022 10:52 am
First Name: Karl
Last Name: VonNeumann
* REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
Location: Pleasant prairie Wisconsin
MTFCA Number: 52955
Board Member Since: 2022

Re: Fs ruckstell parts pile

Post by Karl Von Neumann » Wed Jan 24, 2024 11:01 am

Move to top
Please hold the other 6 voices are taking a vote


Topic author
Karl Von Neumann
Posts: 96
Joined: Thu Jan 06, 2022 10:52 am
First Name: Karl
Last Name: VonNeumann
* REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
Location: Pleasant prairie Wisconsin
MTFCA Number: 52955
Board Member Since: 2022

Re: Fs ruckstell parts pile

Post by Karl Von Neumann » Wed Feb 07, 2024 4:36 pm

Move to top
Please hold the other 6 voices are taking a vote


Topic author
Karl Von Neumann
Posts: 96
Joined: Thu Jan 06, 2022 10:52 am
First Name: Karl
Last Name: VonNeumann
* REQUIRED* Type and Year of Model Ts owned: 1916 touring 1927 tudor 1926 hotrod 1913 speedster (project) 1926 coupe (project)
Location: Pleasant prairie Wisconsin
MTFCA Number: 52955
Board Member Since: 2022

Re: Fs ruckstell parts pile

Post by Karl Von Neumann » Mon Feb 12, 2024 8:29 pm

Move to top
Please hold the other 6 voices are taking a vote

Post Reply Previous topicNext topic