MTFCA Forum

Why strangle your car with modern INCORRECTLY MADE float valves Do my valves work? Ask the guy who just passed you on that last long hill... For info EMAIL ME DIRECTLY

I don't monitor ads closely particularly after it sinks out of view, so EMAIL ME DIRECTLY

I do, however, check email periodically, so for a certain and timely response EMAIL ME DIRECTLY

My check went out this morning, Thx George

Scott yours are in my cars love them great piece.

If you don't want to spend money on an improved carburetor such as a Stromberg and the like, then this is the way to go. It will take your good NH to better! as long as you have the correct diameter fuel line installed.

Scott, email sent...through forum.

preparing first shipments of 2024

don't miss out

email me directly for info

Not too late to take these out for a spin before the big Tours this year

Almost too late to take these out for a spin before the big Tours this year

Your rebuilt NH won't run at its best, unless you have a Full Flow Float Valve with a lead washer. There is not a better, more free-flowing valve or a better seal available. Anywhere.

EMAIL ME THROUGH THE FORUM SYSTEM

thank you

Scott speaks the truth. I have one and have recommended it to everyone I know who has a NH. I did a little before and after testing and can see the improvement. Used to be that my car would sputter a bit on steep hills on a half-empty gas tank...not anymore. I was going to add a electric fuel pump before I got the full-flow valve. It's been a few years now and the fuel pump is still in the box.

2024 production almost all gone - just a few left

no production during winter - next batch will show up around March '25

Thank you