Page 1 of 1
Need a source for Top socket nesting
Posted: Sat Mar 23, 2024 4:58 pm
by JTT3
Forum looking for a source for top socket nesting
These are for Dogleg sockets 09/10 thanks in advance for any help. Best John
Re: Need a source for Top socket nesting
Posted: Sun Mar 24, 2024 8:09 am
by RedDogPilot
John let me get back to you in early May . i think i can help you with the nesting pcs. you need. how did you like the dog leg top i delivered to Hershey work out for you ? Dan M
Re: Need a source for Top socket nesting
Posted: Sun Mar 24, 2024 10:22 am
by Karl Von Neumann
Are these the same on later models of just 09 -10? I have a bunch of misc top bows may have some on them
Re: Need a source for Top socket nesting
Posted: Sun Mar 24, 2024 3:31 pm
by JTT3
Dan, Ray was so excited to get them. Really was nice of Dan Hatch to bring them down from PA. I drove about 7 hours round trip to his house to bring them home so they could go to Ray. He was attending a Board meeting in Ok City. So it worked out almost without a hitch
Re: Need a source for Top socket nesting
Posted: Sun Mar 24, 2024 3:33 pm
by JTT3
Karl truthfully I don’t know but any help would be great. Send some pictures if you can. Best John
Re: Need a source for Top socket nesting
Posted: Sun Mar 24, 2024 6:28 pm
by Karl Von Neumann
JTT3 wrote: ↑Sun Mar 24, 2024 3:33 pm
Karl truthfully I don’t know but any help would be great. Send some pictures if you can. Best John
Illtake aloof and see is any are similar