Page 1 of 1
Fronty header flanges
Posted: Sat Apr 27, 2024 10:38 pm
by Kevin Pharis
Only needed 1… wound up making 10!
Set of 3 flanges made from 1/2” thick mild steel and will fit T/S model Fronty heads... maybe others. 2-3/4” bolt centers and 1-5/8” thru. These are laser cut then chamfered in the CNC. 3 sets available - $65 + shipping
Re: Fronty header flanges
Posted: Sun Apr 28, 2024 9:20 am
by RichardW
I'll buy all 3 sets
Thanks
Richard Williamson
352 843 1530
rwill1914@aol.com
Re: Fronty header flanges
Posted: Sun Apr 28, 2024 10:37 am
by Kevin Pharis
Consider em yours Richard! I’ll send an email to work out the details
Re: Fronty header flanges
Posted: Sun Apr 28, 2024 7:40 pm
by Kevin Pharis
Turns out that a T/S model Fronty head has an exhaust port bolt spacing of 2-11/16”. Holes in the flanges have been reworked, and my dad has been reminded that guessing is not an accurate form of measurement
Re: Fronty header flanges
Posted: Sun Apr 28, 2024 10:00 pm
by Dan McEachern
Close counts for some stuff... Had the same problem with some carb flanges recently, luckily the boo boo fit other carbs I had. funny how 1/16th makes a difference
