MTFCA Forum

WAY of TOPIC , but i have a Charmilles EDM that i am no longer able to use ... this is a die sink machine with dual 30 amp power supplies ... an INDUSTRIAL grade machine that requires 3 phase power ...i have not been able to use this machine for over 8 years and it is very much in my way ... i have this machine listed on ebay for $500 and i will refund $500 on pickup at my site ...that makes this machine FREE ... this is a professional grade machine that is used primarily in the injection mold and die making industry ... weight is approx. 2600 lb. , i am able to help load on your truck or flatbed trailer with a skid steer ...this machine requires 3 phase power ...this machine is FREE to a good home , and NO i will not pay you $500 to take the unit ... Gene French 970-581-2808 or gfrench1953@hotmail.com

EDM pictures

Yes , i do have the manual for this machine

i have been asked about freight shipment ... this machine could be shipped by truck ... freight would be high and the freight company would likely require that the unit be crated ...i am not able to do the crating and simply want the machine gone ...i have moved this machine twice on a flat bed car trailer with my 1/2 ton pickup ... not difficult to do ...please remember that this machine REQUIRES 3 phase power ... a static phase convertor will NOT work , a rotary phase convertor will work BUT will be a big unit ( 50 amp ) this is an industrial unit , not a toy ... gene french