Page 1 of 1
FS high rad shell $100
Posted: Sun Nov 03, 2024 11:05 am
by fordrelic
For Sale high radiator shell.
This is a brass/nickel shell that will need cleaning.
The issue is on inside one vertical edge is is cracked, see picture.
I thought maybe someone could silver solder?
$125 plus shipping.
- t shell foot.jpg (29.08 KiB) Viewed 1605 times
Re: FS high rad shell
Posted: Sun Nov 03, 2024 7:37 pm
by BarnesvilleT
Do you have the bottom flange on the left side?
Re: FS high rad shell
Posted: Mon Nov 04, 2024 7:43 am
by fordrelic
its there, but it's hard to see in pictures. I can take closeup if you are interested.
Re: FS high rad shell
Posted: Mon Nov 04, 2024 12:45 pm
by BarnesvilleT
Thanks for posting the photos. I am not sure I have the ability to fix that long split.
I think I will look for others but will contact you if I am not successful to see if it is still
available.
Thanks,
Bill H.
Re: FS high rad shell
Posted: Tue Nov 05, 2024 5:37 pm
by Allan
Bill, rather than a split, it is most likely a wear groove due to a poorly fitted hood. These are quite common on brass shells. It can most satisfactorily be fixed by folding a brass strip to lay along the inside of the shell and silver soldering it in place through the wear groove. This will require some skill by the solderer. If the rest of the shell is not beaten up, it is a worthwhile repair job.
Allan from down under.
Re: FS high rad shell $100
Posted: Thu Nov 14, 2024 5:02 pm
by fordrelic
$100 plus shipping
Re: FS high rad shell $100
Posted: Sun Nov 17, 2024 7:44 am
by fordrelic
$100 plus shipping
Re: FS high rad shell $100
Posted: Wed Nov 27, 2024 8:08 am
by fordrelic
$100 plus shipping approx. $30
Re: FS high rad shell $100
Posted: Thu Dec 05, 2024 7:45 am
by fordrelic
to the top