Page 1 of 1
Camshaft
Posted: Sat Nov 09, 2024 4:08 pm
by vanco
Wanted: Camshaft, new or used , or acceptable core for a regrind.
Re: Camshaft
Posted: Sat Nov 09, 2024 5:03 pm
by RajoRacer
What year ?
Re: Camshaft
Posted: Sat Nov 09, 2024 8:45 pm
by t-time
try egge machine in Ca they usually have regrinds outright
Re: Camshaft
Posted: Sat Nov 09, 2024 10:22 pm
by vanco
Steve, my block is early, (9-29-15).
Re: Camshaft
Posted: Sat Nov 09, 2024 10:25 pm
by vanco
Thanks Mark!
Re: Camshaft
Posted: Sun Nov 10, 2024 5:46 am
by Dan Hatch
Use 26/27 to keep from having front bearing knock.
If you were closer I got a 5 gal bucket full.
Re: Camshaft
Posted: Sun Nov 10, 2024 8:15 am
by Randall strickland
kevin pruse has new cams
Re: Camshaft
Posted: Sun Nov 10, 2024 8:16 am
by Randall strickland
kevin 330 774 7130
Re: Camshaft
Posted: Sun Nov 10, 2024 12:18 pm
by RajoRacer
I don't have much in late cam cores but have plenty of early BUT Dan H.'s suggestion is worth considering - I believe the new cams are the late style.
Re: Camshaft
Posted: Sun Nov 10, 2024 5:23 pm
by vanco
Dan, Randall and Steve, Thanks for you advice!!
Re: Camshaft
Posted: Mon Nov 11, 2024 10:53 pm
by Craig Leach
Hi John ,
If you end up with a early cam I have one shim kit left.
Craig.