MTFCA Forum

For Sale: A bunch of used T parts, mostly late teens early twenties. Basically stuff I just don't have room for but too good to throw away.
Clockwise from upper left:

• Early drive shaft flange, $5

• 20-25 fan hub with bracket, good crown on hub, comes with spare bracket $10

• Early round flange spindle made into a ?, free

• Cut down fender bracket, late, good for speedster $5

• Main Bearing wrenches (I think), $2 each

• Main Bearing Caps Assortment, also some rod caps $15 for all

• Misc Mid Teens Shackles, worn $5 for all

Shipping not included.
Thanks for looking!

Roger, I am interested in the lower of the two wrenches, the one with just three bends in the handle. Can you advise me of the size of the socket end?

Alan from down under.

I'll take the spindle and the shackles.
Ill send an email,

Clay

I will pass on spindle and shackles.
Clay

Still waiting for advice of size of socket on lower wrench.

Allan from down under.

Allan, It looks like an 11/16". It's hard to make out but I think there is a PLUMB logo stamped in the bottom. Let me know if this will work for you.

11/16" will work. Is there a tool number with the plumb logo? That would help work out its special application. I am hoping it is suitable as a flywheel cap bolt wrench. I've lost my modified box wrench that I used to use, or whoever borrowed it has forgotten where it came from.

Allan from down under.

The driveshaft flange and shackles have been sold. Thanks, MTFCA.

Are the Rod & Main caps still available? If so, I will purchase those.