Page 1 of 1

Jno Brown burner trade for e and j burner

Posted: Wed Jan 16, 2019 4:55 pm
by David Mazza
Burner never used want to trade for e and j burner. Used is ok just want functional with new wick.

Re: Jno Brown burner trade for e and j burner

Posted: Wed Jan 16, 2019 7:11 pm
by Henry K. Lee
David which style or do you have a photo of the one you require.?

Hank

Re: Jno Brown burner trade for e and j burner

Posted: Wed Jan 16, 2019 7:16 pm
by David Mazza
This is the style I need. It’s for an e and j tail lamp. And indexes into the font with the bayonet style lugs at the bottom. I just need the burner itself

Re: Jno Brown burner trade for e and j burner

Posted: Wed Jan 16, 2019 7:26 pm
by Henry K. Lee
I will look tomorrow in my extra parts box.

All the Best,

Hank

Re: Jno Brown burner trade for e and j burner

Posted: Wed Jan 16, 2019 11:36 pm
by BHarper
Hi David,

If Hank comes up short I have these, pictured below. Good luck with your project, Bill

Re: Jno Brown burner trade for e and j burner

Posted: Thu Jan 17, 2019 9:25 am
by David Mazza
Thank you Bill! If Henry doesn’t have one I would absolutely love to have the one with the good top and wick. If you don’t need the Jno Brown I will happily buy it from you.

Re: Jno Brown burner trade for e and j burner

Posted: Thu Jan 17, 2019 9:51 am
by Henry K. Lee
David, I came up short. But if you require the rectangler wick support, let me know with dimensions as I can fabricate it for you.

All the Best,

Hank

Re: Jno Brown burner trade for e and j burner

Posted: Thu Jan 17, 2019 10:04 am
by David Mazza
Thank you Henry for checking for me! I do appreciate it very much! Bill I have sent you a pm. Thank you as well!

Re: Jno Brown burner trade for e and j burner

Posted: Thu Jan 17, 2019 10:08 am
by my1914t
If all doesn't work out, check '5barnauto' on e bay. He has a lot of burners listed right now. Might have what you need. Ross

Re: Jno Brown burner trade for e and j burner

Posted: Thu Jan 17, 2019 10:31 am
by David Mazza
Thank you all. Bill I can’t send pm for some reason. Trying to get that fixed but if you read this you can email me at akdavem@hotmail.com. Thank you!

Re: Jno Brown burner trade for e and j burner

Posted: Fri Jan 18, 2019 7:25 pm
by David Mazza
Bump! hopefully Bill sees this and can email me directly while the forum administration works out the kinks. I do say even with small growing pains the new is far superior to old and thank you too all involved. Bill I would love to have the better of the burners. My cell is 413- three- five-eight 52five-two.