MTFCA Forum

WTB this is a strange size but I thought someone might have one laying around 1/4x18 tap. If so contact psainslie@yahoo.com. Thank you Pat

https://www.ebay.com/itm/267294002958?_ ... R46x2Z6XZg

https://www.ebay.com/itm/360402250580?_ ... R46x2Z6XZg

Pat-I have been buying some odd ball taps and screws from Ebay for early racecar carburetors. Hopefully these help. Hope you are doing well.

You can buy one at Home Depo for $7.48 and they ship for free either next day or within a day or two. You can check the internet for other deals.

BigAl wrote: ↑

Sun Aug 17, 2025 6:17 pm

You can buy one at Home Depo for $7.48 and they ship for free either next day or within a day or two. You can check the internet for other deals.

Al,

I'm fairly certain that the one you can buy at Home Depot is a 1/4-18 NPT tap. In other words, a pipe thread. I am assuming Pat wants a straight thread tap. But, maybe not???

GGZ wrote: ↑

Sun Aug 17, 2025 5:26 pm

https://www.ebay.com/itm/267294002958?_ ... R46x2Z6XZg

https://www.ebay.com/itm/360402250580?_ ... R46x2Z6XZg

Pat-I have been buying some odd ball taps and screws from Ebay for early racecar carburetors. Hopefully these help. Hope you are doing well.

Those are pipe threads. Is that what you want Pat?

The Home Depot NPT tap is $14.98 the non NPT is $14.98

Yes I’m looking for a straight thru tap. Not a NPT. Thanks for the help

Look here
https://www.victornet.com/flypage.html