FS Large homebuilt beadblasting cabinet.

Post parts wanted or for sale here

Topic author
Grizwaldo
Posts: 93
Joined: Tue Jan 08, 2019 7:01 pm
First Name: Steve
Last Name: Grisbee
Location: Cheyenne

FS Large homebuilt beadblasting cabinet.

Post by Grizwaldo » Wed Jul 10, 2019 12:54 pm

It's about 3'x3'x5' so it's pretty goodsized. On wheels so with the handles it's very easy to roll around. It did have some sort of vent straight up but that has been removed. You don't want to breathe that powdered glass so a regular blaster vacuum like Scatblast sells should be obtained and used and even then they recommend a face mask. It's out of an estate so there was no one to ask about the piping to the nozzle,some familiarization and some new works may be required. The thing was built out of plywood but there is some sheetmetal on the back panel inside. I'm selling it "as-is,where-is"but if someone is planning on building one it would be a head start. So it will need to be picked up but no giant rush getting it out of here. It was used outside on a patio so the angle iron brackets that can be swung out over the glass believed to hold a piece of plywood to shield glare from the sun. A Scatblast catalog is included. Price is $150 check or paypal,please PM me if interested.
Attachments
IMG_5353.JPG
IMG_5352.JPG
IMG_5351.JPG
IMG_5350.JPG
IMG_5349.JPG


Topic author
Grizwaldo
Posts: 93
Joined: Tue Jan 08, 2019 7:01 pm
First Name: Steve
Last Name: Grisbee
Location: Cheyenne

Re: FS Large homebuilt beadblasting cabinet.

Post by Grizwaldo » Tue Jul 16, 2019 12:14 am

Would it help if I offered delivery within 50 miles?

Post Reply Previous topicNext topic