Page 1 of 1
Wanted - Tap and Reamer for Steven's Axle Tool
Posted: Thu Jan 01, 2026 6:53 pm
by Stevew
Wanted - Looking for Tap and Reamer for a Steven's Axle Tool. I have the Axle Tool, I need a new of used (in good condition) Tap and Reamer that will work with the Steven's Axle Tool.
Thanks
Steve
Re: Wanted - Tap and Reamer for Steven's Axle Tool
Posted: Thu Jan 01, 2026 7:31 pm
by JTT3
Have you contacted Dan Hatch, he was reproducing a superior set of reamers & taps.
Re: Wanted - Tap and Reamer for Steven's Axle Tool
Posted: Sat Jan 03, 2026 12:29 pm
by Stevew
I did contact Dan, He did not get the number of people interested in tooling to make another run of the Taps and Reamers. I have found a Tap that will work, Now I just need a Reamer, New or Used in good condition will work. If you have one or know were I can find one, please let me know.
Thanks to every one that helped ....
Regards
Stevew