Page 1 of 1

FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Jul 13, 2019 1:25 pm
by Henry K. Lee
I have too much good stuff, time for others to have fun.

These cranks are done to the total extreme. Dad picked them up years back (20 years) already shorten in I believe Montana. We went stupid on the rest by cross drilling, nose mods, weights and balance, bull nosing the main bearing surfaces for full oil circumference oiling to both surfaces, ie rods/mains. We had a failure as you can see on number 3 (looks like lack of penetration). These could be all reground and welded by an experienced machine shop for about $250.00 or less. I just do not have any extra time so I am selling #1 and #2 for $750.00 each plus shipping and #3 for $600.00 plus shipping.

Email if interested.
IMG_1752.jpg
IMG_1753.jpg
IMG_1754.jpg
IMG_1755.jpg
IMG_1759.jpg

All the Best,

Hank in Tin-A-See

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Jul 13, 2019 1:26 pm
by Henry K. Lee
IMG_1758.jpg
IMG_1757.jpg
IMG_1756.jpg

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Jul 13, 2019 1:41 pm
by csnailnrun
Messaged ya Hank!

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Jul 13, 2019 6:04 pm
by Henry K. Lee
Number one is sold to James! Thanks MTFCA!

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Wed Jul 17, 2019 9:18 am
by Henry K. Lee
BTT

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Jul 20, 2019 7:38 pm
by Henry K. Lee
BTT

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sun Jul 28, 2019 2:06 pm
by Henry K. Lee
BTT

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Tue Aug 06, 2019 9:45 am
by Henry K. Lee
BTT

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Sat Sep 28, 2019 8:11 pm
by Henry K. Lee
Last Time!

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Wed Oct 30, 2019 5:25 pm
by Henry K. Lee
one more time!

Re: FS Shorten, Cross Drilled, Balanced, Bull Nosed Main's A Cranks for Model T Blocks

Posted: Thu Nov 07, 2019 4:17 pm
by Henry K. Lee
Two more time.