1911 parts

Post parts wanted or for sale here

Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

1911 parts

Post by Michael Paul » Fri Jul 19, 2019 12:14 pm

Yes, enough to build a car. Correct engine, 60,000 serial number range. Clam shell rear end, two piece drive shaft, 7 rivet pan, low head with out made in USA , 11 frame, correct running boards, hub caps, steering column is correct for 1911, the one that was made just after the 09/10 and before the late 11-12 offset hole style. Nice radiator, small dent in tank and blemish on the find but excellent core. Correct hogs head with lettered pedals. Body needs wood completed, I have original wood parts to copy.
Asking $14 k for the lot. Don't want to part out!
Email or call for more information and photos.
Attachments
IMG_20190718_124836593-1632x918.jpg
IMG_20190719_090343049-918x1632.jpg
IMG_20190719_091020861-1632x918.jpg


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sat Jul 20, 2019 10:55 am

Forgot to mention that I have a windshield and top bows that goes with it. Also engine appears to be rebuilt, I took it off from the pan and the Babbitt on the rods and the crank appear to be fairly new. My plan was to pull the Pistons back out rehome the cylinders and clean the rings all up before trying to start it. The transmission looks in great condition also.

This will make a great restoration project for somebody I've been collecting parts for years. Only reason for selling is to fund my 09 and other 1911 project. Give me a call or email for more photos.
Have a great day! Mike


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Mon Jul 22, 2019 9:46 am

Here's a photo of the inside. I loosened one rod, the Babbitt looks good. I hate to part it out.
Have a great day
Attachments
IMG_20190718_121821690-1632x918.jpg


rgould1910
Posts: 179
Joined: Tue Jan 22, 2019 8:16 am
First Name: Richard
Last Name: Gould
Location: Folsom, CA

Re: 1911 parts

Post by rgould1910 » Mon Jul 22, 2019 11:04 am

If you decide to part it out, I'd be interested in the head and steering column.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Mon Jul 22, 2019 2:06 pm

I may go that route.

I would have to have most of the parts committed to before I started selling things.

Here's what I'm thinking
Body, 3000
Engine with pan and transmission, hogshead. 5000
Rear end with 2-piece driveshaft 3000
Steering column 850
Top Bows 500
Wheels with hubcaps 500
Front axle 250
All of the lights 750
Radiator 800
Hood 200
Firewall with hood former 175
Windshield 400
Side light and tail light bracket 75
Running boards (11/12 with correct script) 175
Frame with running board brackets 650
Front fender brackets 125
Rear fender brackets 75
Rear fenders excellent originals with original paint 700


modeltbarn
Posts: 103
Joined: Sun Jan 06, 2019 6:59 pm
First Name: Gary
Last Name: London
Location: Camarillo

Re: 1911 parts

Post by modeltbarn » Mon Jul 22, 2019 3:47 pm

Hi Mike.

I sent you a couple of emails about the windshield, rear fenders, running boards, and side lamp brackets.

Gary London


modeltbarn
Posts: 103
Joined: Sun Jan 06, 2019 6:59 pm
First Name: Gary
Last Name: London
Location: Camarillo

Re: 1911 parts

Post by modeltbarn » Mon Jul 22, 2019 4:08 pm

OK, another post on the parts.... I'd like the frame too, and will pass on the windshield. Gotta save somewhere!

Gary

User avatar

Tbird
Posts: 125
Joined: Sun Jan 06, 2019 6:51 pm
First Name: Mike
Last Name: Bird
Location: Goshen IN

Re: 1911 parts

Post by Tbird » Mon Jul 22, 2019 4:09 pm

Sent you an email about the steering column
Mike Bird


TRZim
Posts: 17
Joined: Sun Jan 06, 2019 11:56 pm
First Name: Tom
Last Name: Zimmer
Location: Upland Ca.
MTFCA Number: 15920

Re: 1911 parts

Post by TRZim » Mon Jul 22, 2019 5:33 pm

What is make of windshield, a picture would be nice. What are make and model number of side and tail lights?


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Mon Jul 22, 2019 9:26 pm

Hi, thanks for all of the emails, the windshield is a Rands. I'll send more engine photos tomorrow.
The side lights and tail lite are E&J


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Fri Jul 26, 2019 3:30 pm

Here's a photo of the serial number
Attachments
IMG_20190723_105016464-1632x918.jpg


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sat Aug 03, 2019 11:14 am

Good morning, the rear fenders are sold.
I'll take 2,000 for just the rearend without the driveshaft. 500 for the driveshaft.
Have a great day, Mike


brassford
Posts: 99
Joined: Sat Jan 12, 2019 9:26 am
First Name: Rick
Last Name: Epstein
Location: Aurora, CO
MTFCA Number: 30326

Re: 1911 parts

Post by brassford » Sat Aug 03, 2019 11:20 am

Is the body sold?


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sat Aug 03, 2019 12:48 pm

No body is not sold yet, I have several interested.
Also I should have said top sockets not bows. I have a few sets, some are 1913 I think


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sat Aug 03, 2019 3:37 pm

Steering column is sold.


Nikko012
Posts: 34
Joined: Tue Feb 05, 2019 11:23 am
First Name: Raymond
Last Name: Emling
Location: Kingston, Washington
Board Member Since: 2015

Re: 1911 parts

Post by Nikko012 » Sat Aug 03, 2019 11:36 pm

Hi Michael
Sent e-mail for parts,
Thanks Ray

User avatar

Tbird
Posts: 125
Joined: Sun Jan 06, 2019 6:51 pm
First Name: Mike
Last Name: Bird
Location: Goshen IN

Re: 1911 parts

Post by Tbird » Sun Aug 04, 2019 8:33 am

Michael,
I sent you an email about the windshield. mikebird@lifeattheridge.net
Thanks
Mike Bird


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sun Aug 04, 2019 12:25 pm

The windshield, frame with running board brackets and the rear fender brackets are sold.
I'm getting requests to part out the engine. Engine, transmission, head $4,400.. hogs head with very good pedals, $200. I guess I'll just keep the 7 rivet pan for now. I also have 1913 steering column, $500.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sun Aug 04, 2019 12:29 pm

Still have the 1911 flat tube core radiator. It has a small dent in the tank but the core is excellent. Should be a great driver radiator!


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Sun Aug 04, 2019 2:26 pm

Found an extra original 1911 touring front seat. $750 I would take $2500 for the body in the photos but that's about it. Also a 1912 Rands windshield with a shorter top section. $450


Michael A
Posts: 65
Joined: Wed Jan 09, 2019 6:16 pm
First Name: Michael
Last Name: Abbott
Location: Adelaide South Australia
MTFCA Number: 12345

Re: 1911 parts

Post by Michael A » Mon Aug 05, 2019 6:12 pm

Hi Michael,
Are the side light brackets still available
Michael A


Terry Irish
Posts: 1
Joined: Tue Aug 06, 2019 6:32 am
First Name: Terry
Last Name: Irish
Location: Smiths Falls, Ontario
MTFCI Number: 22232

Re: 1911 parts

Post by Terry Irish » Tue Aug 06, 2019 6:36 am

Do you have anyone that could transport engine to Hershey?

User avatar

KWTownsend
Posts: 276
Joined: Mon Jan 07, 2019 6:51 pm
First Name: Keith
Last Name: Townsend
Location: Gresham, Orygun
MTFCA Number: 14778
MTFCA Life Member: YES
MTFCI Number: 16305
Board Member Since: 1999

Re: 1911 parts

Post by KWTownsend » Tue Aug 06, 2019 1:18 pm

Michael-
Do you still have that top boot or pattern available?

-Keith


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Tue Aug 06, 2019 3:38 pm

Yes the engine shipped to Hershey for $300
Body is sold, the extra front seat is still available.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Tue Aug 06, 2019 3:39 pm

Yes I have the top boot

User avatar

KWTownsend
Posts: 276
Joined: Mon Jan 07, 2019 6:51 pm
First Name: Keith
Last Name: Townsend
Location: Gresham, Orygun
MTFCA Number: 14778
MTFCA Life Member: YES
MTFCI Number: 16305
Board Member Since: 1999

Re: 1911 parts

Post by KWTownsend » Tue Aug 06, 2019 9:45 pm

Email sent.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Tue Aug 06, 2019 11:41 pm

Yes I have a friend going to Hershey, he will haul the engine there for $300
I've had several people interested, no one has committed yet. It seems ashame to start parting it out. It has the correct heavy valve covers also.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Wed Aug 07, 2019 1:09 am

I have the side lamp brackets, I think they are repo.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Thu Aug 08, 2019 11:15 am

2 piece driveshaft is sold, radius rods are sold, still have the radiator($750) firewall($100) hood former($100), hood ($100), firewall brackets ($75) , nice engine block with crank, pistons valves ( $3800) low head without made in USA ($300) 1911 transmission ($350) early stamped magneto ring with magnets($300) excellent hogshead with sharp lettering on pedals ($225) seven rivet pan ($500) note: I won't sell any of the engine components until the engine block is sold. it's crazy to part out an engine like this?? How about $4200 for the engine with the parts I listed, that would be $4500 delivered to Hershey. Still have front axel, wheels, original hubcaps, side lamps, tail lamp, headlights, 12 rivet clamshell rearend, front and rear tapered springs.


TRZim
Posts: 17
Joined: Sun Jan 06, 2019 11:56 pm
First Name: Tom
Last Name: Zimmer
Location: Upland Ca.
MTFCA Number: 15920

Re: 1911 parts

Post by TRZim » Thu Aug 08, 2019 11:55 am

I would like the low head for the 11.

User avatar

Walter Higgins
Posts: 112
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Walter
Last Name: Higgins
Location: Realville, PA
MTFCA Number: 396
MTFCA Life Member: YES
MTFCI Number: 153

Re: 1911 parts

Post by Walter Higgins » Thu Aug 08, 2019 5:35 pm

Email sent regarding the hubcaps. Thanks.


Bill Everett
Posts: 66
Joined: Tue Jan 08, 2019 8:29 pm
First Name: Bill
Last Name: Everett
Location: Collierville, TN
MTFCA Number: 93
MTFCA Life Member: YES
Board Member Since: 2011

Re: 1911 parts

Post by Bill Everett » Thu Aug 08, 2019 9:25 pm

E-mail sent about the lights and both springs.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Fri Aug 09, 2019 12:04 pm

Everything has been sold pending payment except the 12 rivet rear end, and the set of lights, They are e&j the headlights have a plain bonnet. I think Bill inquired first. I did find an extra hood former for the person who inquired first.
Thank you mtfca!


TRZim
Posts: 17
Joined: Sun Jan 06, 2019 11:56 pm
First Name: Tom
Last Name: Zimmer
Location: Upland Ca.
MTFCA Number: 15920

Re: 1911 parts

Post by TRZim » Fri Aug 09, 2019 12:08 pm

did you get my email re. low head? did not hear back from you.


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Fri Aug 09, 2019 12:51 pm

Yes I did receive the email on the low head, I wasn't going to sell any of the engine parts until the block was sold, that was probably lost in my post, sorry. The engine was purchased as one unit all together, so it wasn't parted out.
If I find another head in my container, I'll send you an email.
Thanks again to mtfca and everyone who responded.

User avatar

Walter Higgins
Posts: 112
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Walter
Last Name: Higgins
Location: Realville, PA
MTFCA Number: 396
MTFCA Life Member: YES
MTFCI Number: 153

Re: 1911 parts

Post by Walter Higgins » Fri Aug 09, 2019 4:17 pm

Hi Micheal,

I sent an you email through your forum profile regarding the hub caps but haven't heard back. Might check your spam folder if you haven't seen it.

Thanks,

-Walter


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Fri Aug 09, 2019 5:02 pm

Sorry the hub caps were sold with the wheels

User avatar

Walter Higgins
Posts: 112
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Walter
Last Name: Higgins
Location: Realville, PA
MTFCA Number: 396
MTFCA Life Member: YES
MTFCI Number: 153

Re: 1911 parts

Post by Walter Higgins » Fri Aug 09, 2019 5:45 pm

No worries. Thanks for the reply.


Psainslie
Posts: 17
Joined: Sun Jan 27, 2019 8:13 pm
First Name: Patrick
Last Name: Ainslie
Location: Bloomfield Hills, MI

Re: 1911 parts

Post by Psainslie » Sun Aug 11, 2019 7:39 pm

Walter. If the person who wants the steering column falls thru I will purchase it. Thanks. Pat

User avatar

Walter Higgins
Posts: 112
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Walter
Last Name: Higgins
Location: Realville, PA
MTFCA Number: 396
MTFCA Life Member: YES
MTFCI Number: 153

Re: 1911 parts

Post by Walter Higgins » Sun Aug 11, 2019 9:00 pm

Psainslie wrote:
Sun Aug 11, 2019 7:39 pm
Walter. If the person who wants the steering column falls thru I will purchase it. Thanks. Pat
Sorry, but I'm not the seller. Scroll up....


modeltbarn
Posts: 103
Joined: Sun Jan 06, 2019 6:59 pm
First Name: Gary
Last Name: London
Location: Camarillo

Re: 1911 parts

Post by modeltbarn » Sun Aug 11, 2019 11:59 pm

Hi Pat

I'm the one buying the column, and the check is going out in the morning.


Psainslie
Posts: 17
Joined: Sun Jan 27, 2019 8:13 pm
First Name: Patrick
Last Name: Ainslie
Location: Bloomfield Hills, MI

Re: 1911 parts

Post by Psainslie » Mon Aug 12, 2019 11:10 am

Thanks and I’m glad you got it. I want to then use this opportunity to reach out and see if any one else make have a 1910-1911 steering column for sale. Thanks Pat


andrew o sullivan
Posts: 11
Joined: Sun Feb 17, 2019 2:35 pm
First Name: andrew
Last Name: o sullivan
Location: ireland
Board Member Since: 2014

Re: 1911 parts

Post by andrew o sullivan » Tue Aug 13, 2019 6:23 am

hi there I have an interest in the rear axle thanks aosconstruction@gmail.com


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Tue Aug 13, 2019 10:18 am

Hi, still have the rear axel, I've sold the driveshaft and radius rods. The axel comes with the axel's and differential. I would take $2000 delivered to Hershey.
Thanks, Mike


andrew o sullivan
Posts: 11
Joined: Sun Feb 17, 2019 2:35 pm
First Name: andrew
Last Name: o sullivan
Location: ireland
Board Member Since: 2014

Re: 1911 parts

Post by andrew o sullivan » Tue Aug 13, 2019 3:40 pm

yes Michael ill take the axel thanks


Topic author
Michael Paul
Posts: 136
Joined: Sun Jan 06, 2019 11:32 am
First Name: Michael
Last Name: Paul
Location: Smartsville, California 95977
MTFCA Number: 31791

Re: 1911 parts

Post by Michael Paul » Thu Aug 15, 2019 1:57 pm

The 12 rivet clamshell rearend is spoken for pending payment. Thanks mtfca!

Post Reply Previous topicNext topic