Page 1 of 1

Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Tue Aug 06, 2019 12:50 pm
by moozark
Accessory wire wheel 30” x 3 ½ “. I believe it is a Phelps (correct me if I’m wrong). The actual widest-point measurement is 24 3/8”. It has the hub. Has surface rust overall but seems to be solid. $290.00 plus shipping. Buyer pays actual cost of shipping.
Houk 03.jpg
Houk 01.jpg
Houk 02.jpg
Houk 04.jpg

Re: Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Tue Aug 06, 2019 1:23 pm
by tman12
Hi From Iowa! the Phelps wheels I have are cen lock & dental drive requiring a spec Phelps hub. Your wheel looks to me like a front that would go right onto the spindle. I'm not an expert - only an enthusiast who like wires! John

Re: Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Tue Aug 06, 2019 2:10 pm
by RajoRacer
If you look close on the inside wheel photo, it appears there is a Dental drive - I believe the Phelps hub (front) is stuck in the wheel !

Re: Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Tue Aug 06, 2019 5:43 pm
by Kevin Pharis
Definitely a Phelps small center wheel. May or not be the right hub for the T... can’t tell that from the pic

Re: Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Wed Aug 07, 2019 1:41 am
by RichardW
I will buy wheel

Thanks

Richard

Re: Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Wed Aug 07, 2019 10:13 am
by moozark
Richard,
I sent you an email message.

Re: SOLD Phelps Accessory Wire Wheel 30" x 3 1/2" with Hub

Posted: Mon Aug 12, 2019 1:12 pm
by moozark
The wheel has been sold and is on its way to a good home in Florida.