Zenith S4BF Manifolds WTB

Post parts wanted or for sale here

Topic author
StanHowe
Posts: 979
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
* REQUIRED* Type and Year of Model Ts owned: 2
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Zenith S4BF Manifolds WTB

Post by StanHowe » Mon Aug 12, 2019 1:00 pm

Anybody have an extra S4BF manifold laying around?? I need a couple originals, not the repops that have the flange the wrong orientation. I bought some carbs but no manifolds with them.
I'd probably also buy a complete unrestored setup too.
I'd actually like to get some cast.

Thanks,
Stan Howe
406 949 three four four eight
stanhowemt@aol.com


Neil Dorey
Posts: 7
Joined: Sun Jan 13, 2019 1:00 pm
First Name: Neil
Last Name: Dorey
* REQUIRED* Type and Year of Model Ts owned: 1915 Touring
Location: Armstrong, B.C.

Re: Zenith S4BF Manifolds WTB

Post by Neil Dorey » Fri Aug 16, 2019 1:39 am

Might have one hanging on the shop wall, will have a look at it tomorrow.


art32mor
Posts: 96
Joined: Thu Feb 07, 2019 8:21 pm
First Name: Art
Last Name: Morra
* REQUIRED* Type and Year of Model Ts owned: 24T Touring
Location: PA
MTFCI Number: 14286

Re: Zenith S4BF Manifolds WTB

Post by art32mor » Fri Aug 16, 2019 1:54 am

Sorry sold my kast one last weekend swap do have the brass carb best offer


Topic author
StanHowe
Posts: 979
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
* REQUIRED* Type and Year of Model Ts owned: 2
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: Zenith S4BF Manifolds WTB

Post by StanHowe » Fri Aug 16, 2019 12:28 pm

Thanks for looking. At this point I have about 4 S4BF's but no manifolds. I still might be interested in another one depending on what you want for it. What I really want is another one like I bought in Bakersfield a couple years ago. All complete for $65. =)


Neil Dorey
Posts: 7
Joined: Sun Jan 13, 2019 1:00 pm
First Name: Neil
Last Name: Dorey
* REQUIRED* Type and Year of Model Ts owned: 1915 Touring
Location: Armstrong, B.C.

Re: Zenith S4BF Manifolds WTB

Post by Neil Dorey » Fri Aug 23, 2019 12:10 am

Turns out the one I have is a FA127X.

User avatar

DanTreace
Posts: 3299
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
* REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
Location: North Central FL
MTFCA Number: 4838
MTFCI Number: 115
Board Member Since: 2000
Contact:

Re: Zenith S4BF Manifolds WTB

Post by DanTreace » Mon Aug 26, 2019 11:09 am

Stan

Have this one, has plug for a vacuum hole, but otherwise ok. No takers at Chickasha for $125. You can use it I bet. Dan
phone 904 six one six 4362
B0E0ECF5-C4C5-46AB-9BAB-21555724E951.jpeg
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford


Topic author
StanHowe
Posts: 979
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
* REQUIRED* Type and Year of Model Ts owned: 2
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: Zenith S4BF Manifolds WTB

Post by StanHowe » Mon Aug 26, 2019 1:41 pm

I'm your Huckleberry!!! Send me an email address and I'll throw some bucks your way.
Thanks, Dan.

Post Reply Previous topicNext topic