Wanted plate bracket

Post parts wanted or for sale here

Topic author
Brent Teltow
Posts: 37
Joined: Thu Jan 10, 2019 1:54 pm
First Name: Brent
Last Name: Teltow
Location: Michigan

Wanted plate bracket

Post by Brent Teltow » Wed Sep 25, 2019 5:43 am

Hello everyone, I am looking for license plate/ light bracket. This is for a 15 that was converted with a truck bed. Thanks Brent

User avatar

TRDxB2
Posts: 1199
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: Wanted plate bracket

Post by TRDxB2 » Wed Sep 25, 2019 11:22 am

I do not have one but is this what you are looking for?
Attachments
1915-Ford-Model-T-3-630x390.jpg


Topic author
Brent Teltow
Posts: 37
Joined: Thu Jan 10, 2019 1:54 pm
First Name: Brent
Last Name: Teltow
Location: Michigan

Re: Wanted plate bracket

Post by Brent Teltow » Wed Sep 25, 2019 1:26 pm

Yes, that is what I was imagining.


Topic author
Brent Teltow
Posts: 37
Joined: Thu Jan 10, 2019 1:54 pm
First Name: Brent
Last Name: Teltow
Location: Michigan

Re: Wanted plate bracket

Post by Brent Teltow » Wed Sep 25, 2019 1:32 pm

I am new to this forum, and to the model t hobby. I truly love this site, l feel I gain knowledge every post I read .

User avatar

RajoRacer
Posts: 1634
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Wanted plate bracket

Post by RajoRacer » Wed Sep 25, 2019 1:42 pm

There were/are several types of original lamp/license holders - '15 would be a 2 pc. affair with the license bracket bolted to the lamp bracket. There were also aftermarket brackets for purposes as you intend to do by dropping the lamp down below the box.

User avatar

RajoRacer
Posts: 1634
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Wanted plate bracket

Post by RajoRacer » Wed Sep 25, 2019 5:20 pm

I have several types available - I'll go take a photo.

User avatar

RajoRacer
Posts: 1634
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Wanted plate bracket

Post by RajoRacer » Wed Sep 25, 2019 6:14 pm

Here's a few. Drop me a note through here if you're interested. I don't have the license plate arm for the early style - hard to find the originals but J. Putnam who is on here once in a while might have cast some up.
Attachments
rear brackets 1.JPG
rear brackets 2.JPG
rear brackets 3.JPG
rear bracket 4.JPG
rear bracket 5.JPG


Topic author
Brent Teltow
Posts: 37
Joined: Thu Jan 10, 2019 1:54 pm
First Name: Brent
Last Name: Teltow
Location: Michigan

Re: Wanted plate bracket

Post by Brent Teltow » Wed Sep 25, 2019 7:49 pm

pm sent to Steve


Topic author
Brent Teltow
Posts: 37
Joined: Thu Jan 10, 2019 1:54 pm
First Name: Brent
Last Name: Teltow
Location: Michigan

Re: Wanted plate bracket

Post by Brent Teltow » Thu Sep 26, 2019 1:36 pm

Steve , I would like to purchase a later style if you have one for sale. Thank you,Brent

User avatar

RajoRacer
Posts: 1634
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Wanted plate bracket

Post by RajoRacer » Thu Sep 26, 2019 1:42 pm

If you are mounting to a wood sill, any of the three above would work - the runabout style with the grey bracket would work & least expensive.

User avatar

RajoRacer
Posts: 1634
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Wanted plate bracket

Post by RajoRacer » Thu Sep 26, 2019 1:43 pm

I didn't receive an email ?

Post Reply Previous topicNext topic