Rebuilt Zenith S4BF carb and intake

Post parts wanted or for sale here

Topic author
Bruce Compton
Posts: 200
Joined: Thu Jan 10, 2019 11:23 am
First Name: Bruce
Last Name: Compton
Location: Kemptville

Rebuilt Zenith S4BF carb and intake

Post by Bruce Compton » Sun Dec 01, 2019 4:51 pm

This is a rebuilt Zenith S4BF by Stan Howe that I got from Jay a few months ago and I don't think has ever been used since the rebuild. The project I intended it for has gone so I don't have a use for the carb/intake. Note that it has the Stan Howe adjustable main jet. I have never had the chance to run one of these set-ups but apparently they are excellent . Asking $750.00 including shipping from Canada till Dec 10th, or from Florida after Dec 18th. Thanks : Bruce
Attachments
IMG_5145.JPG
IMG_5144.JPG
IMG_5143.JPG
IMG_5142.JPG
IMG_5141.JPG


Topic author
Bruce Compton
Posts: 200
Joined: Thu Jan 10, 2019 11:23 am
First Name: Bruce
Last Name: Compton
Location: Kemptville

Re: Rebuilt Zenith S4BF carb and intake

Post by Bruce Compton » Sat Dec 14, 2019 9:49 pm

Still available with shipping from Florida in time for Christmas


mountain muncher
Posts: 7
Joined: Sat Feb 16, 2019 5:40 pm
First Name: John
Last Name: Rehberg
Location: Springfield, NE
MTFCA Number: 20693

Re: Rebuilt Zenith S4BF carb and intake

Post by mountain muncher » Thu Dec 19, 2019 12:50 am

Hi Bruce,
Did you make it to warm weather by now? If so and the Zenith remains available, I'll take it off your hands. I'm in CO at our cabin for the holidays. Please send me an email and we can take care of the details.
HoHo
John


Topic author
Bruce Compton
Posts: 200
Joined: Thu Jan 10, 2019 11:23 am
First Name: Bruce
Last Name: Compton
Location: Kemptville

Re: Rebuilt Zenith S4BF carb and intake

Post by Bruce Compton » Fri Dec 20, 2019 11:58 am

Sold and shipped to John. Thanks MTFCA

User avatar

Henry K. Lee
Posts: 3046
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: Rebuilt Zenith S4BF carb and intake

Post by Henry K. Lee » Fri Dec 20, 2019 12:02 pm

John that carb will work excellent on your build!!!!

Hank


StanHowe
Posts: 636
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: Rebuilt Zenith S4BF carb and intake

Post by StanHowe » Fri Dec 20, 2019 1:59 pm

They are great carbs.
Couple things.
1. Do not grind out the holes in the intake where it mounts to the block. That design is part of the success of those carbs.

2. If you have problems with the adj jet seeping fuel, let me know and I'll replace it. The first couple designs didn't seal as well as the newer design does.

3. I have two of those in stock right now.


mountain muncher
Posts: 7
Joined: Sat Feb 16, 2019 5:40 pm
First Name: John
Last Name: Rehberg
Location: Springfield, NE
MTFCA Number: 20693

Re: Rebuilt Zenith S4BF carb and intake

Post by mountain muncher » Fri Dec 20, 2019 4:03 pm

Thanks Hank and Stan. And Bruce too.
We are going to give it a go. I like the way the manifold fits with a Generator. I didn't think I could go wrong with a Howe-Built Zenith.

Merry Christmas to all.

John


Topic author
Bruce Compton
Posts: 200
Joined: Thu Jan 10, 2019 11:23 am
First Name: Bruce
Last Name: Compton
Location: Kemptville

Re: Rebuilt Zenith S4BF carb and intake

Post by Bruce Compton » Sat Dec 21, 2019 9:54 am

Hi Stan : Thanks for chiming in with the advice on the intake.Most guys would hog out any "extra" material. Bruce

Post Reply Previous topicNext topic