UPDATE on 13/32x16 Taps

Post parts wanted or for sale here

Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

UPDATE on 13/32x16 Taps

Post by Dan Hatch » Mon Dec 02, 2019 11:41 am

Due to the demand on these taps, I was able to get a lower price on the larger number to be made. I will pass the savings on to you.

The new price is $40.00 each + shipping.

This price will apply to everyone that has ordered a tap as well as new orders. I expect they will be ready by the middle of this month.
To order same as before, email me at address in pictures. Thanks Dan
Attachments
EF7B5E95-16FF-4549-940E-F57F0F5725DC.jpeg
EF7B5E95-16FF-4549-940E-F57F0F5725DC.jpeg (50.1 KiB) Viewed 802 times


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Mon Dec 02, 2019 3:44 pm

Btt


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Tue Dec 03, 2019 6:52 am

Btt


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Wed Dec 04, 2019 4:26 am

Btt


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Thu Dec 05, 2019 7:11 am

If you want one of these, better get on the list. Do not think there will be another batch. Thanks Dan


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Fri Dec 06, 2019 2:06 pm

Btt


Scott_Conger
Posts: 1662
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Re: UPDATE on 13/32x16 Taps

Post by Scott_Conger » Fri Dec 06, 2019 6:42 pm

I will reinforce what Dan said. These rarely come available and often are dull. An awful lot of rear ends have been damaged by folks who don't know what they're doing and use the wrong tap.

If you ever intend to rebuild a rear end, you need this tap.

Dan, I just talked myself into one...I have some original taps, but could use a shiny sharp one. Put me on your list, please. Thank you.
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Scott C.
Posts: 97
Joined: Sun Jan 06, 2019 11:44 am
First Name: Scott
Last Name: Clements
Location: Waynetown Indiana
MTFCA Number: 49592

Re: UPDATE on 13/32x16 Taps

Post by Scott C. » Sat Dec 07, 2019 1:18 am

I was told that the 8' aeromotor wind mill hub is 13/32x 16 threads. They sell the tap for $71. So, Dan's price is a good deal.

https://aermotorwindmill.com/products/s ... 2433345025


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Sun Dec 08, 2019 4:22 am

Btt


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Sun Dec 08, 2019 3:47 pm

If anyone ordered one and has NOT got a reply, please email me now. Please use the email address in the picture. NOT the forum private message.
Also, use you real name in the email along with your Forum name so I make sure I only count you one time.

There are only 6 taps left if I am counting right. Thanks Dan

User avatar

TRDxB2
Posts: 406
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: UPDATE on 13/32x16 Taps

Post by TRDxB2 » Sun Dec 08, 2019 9:27 pm

Sent 2 email still no reply. want one my zip f.brandi@mchsi.com zip is 61265


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Mon Dec 09, 2019 7:04 am

Btt


Christopher Kramer
Posts: 2
Joined: Sun Feb 03, 2019 8:59 am
First Name: Chris
Last Name: Kramer
Location: Woodstock, ON
Board Member Since: 2005

Re: UPDATE on 13/32x16 Taps

Post by Christopher Kramer » Tue Dec 10, 2019 6:42 am

Sent you another email Dan. Hopefully this one comes through


Topic author
Dan Hatch
Posts: 502
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: UPDATE on 13/32x16 Taps

Post by Dan Hatch » Tue Dec 10, 2019 2:16 pm

Guys: The taps are all spoken for. I will let you know if there are any back outs. Thanks Dan


Scott C.
Posts: 97
Joined: Sun Jan 06, 2019 11:44 am
First Name: Scott
Last Name: Clements
Location: Waynetown Indiana
MTFCA Number: 49592

Re: UPDATE on 13/32x16 Taps

Post by Scott C. » Wed Dec 11, 2019 1:21 am

Dan, how about a die?

Post Reply Previous topicNext topic