UPDATE on 13/32x16 Taps
-
Topic author - Posts: 4111
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
UPDATE on 13/32x16 Taps
Due to the demand on these taps, I was able to get a lower price on the larger number to be made. I will pass the savings on to you.
The new price is $40.00 each + shipping.
This price will apply to everyone that has ordered a tap as well as new orders. I expect they will be ready by the middle of this month.
To order same as before, email me at address in pictures. Thanks Dan
The new price is $40.00 each + shipping.
This price will apply to everyone that has ordered a tap as well as new orders. I expect they will be ready by the middle of this month.
To order same as before, email me at address in pictures. Thanks Dan
- Attachments
-
- EF7B5E95-16FF-4549-940E-F57F0F5725DC.jpeg (50.1 KiB) Viewed 5594 times
-
Topic author - Posts: 4111
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: UPDATE on 13/32x16 Taps
If you want one of these, better get on the list. Do not think there will be another batch. Thanks Dan
-
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: UPDATE on 13/32x16 Taps
I will reinforce what Dan said. These rarely come available and often are dull. An awful lot of rear ends have been damaged by folks who don't know what they're doing and use the wrong tap.
If you ever intend to rebuild a rear end, you need this tap.
Dan, I just talked myself into one...I have some original taps, but could use a shiny sharp one. Put me on your list, please. Thank you.
If you ever intend to rebuild a rear end, you need this tap.
Dan, I just talked myself into one...I have some original taps, but could use a shiny sharp one. Put me on your list, please. Thank you.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 805
- Joined: Sun Jan 06, 2019 11:44 am
- First Name: Scott
- Last Name: Clements
- Location: Waynetown Indiana
- MTFCA Number: 49592
Re: UPDATE on 13/32x16 Taps
I was told that the 8' aeromotor wind mill hub is 13/32x 16 threads. They sell the tap for $71. So, Dan's price is a good deal.
https://aermotorwindmill.com/products/s ... 2433345025
https://aermotorwindmill.com/products/s ... 2433345025
-
Topic author - Posts: 4111
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: UPDATE on 13/32x16 Taps
If anyone ordered one and has NOT got a reply, please email me now. Please use the email address in the picture. NOT the forum private message.
Also, use you real name in the email along with your Forum name so I make sure I only count you one time.
There are only 6 taps left if I am counting right. Thanks Dan
Also, use you real name in the email along with your Forum name so I make sure I only count you one time.
There are only 6 taps left if I am counting right. Thanks Dan
-
- Posts: 5412
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: UPDATE on 13/32x16 Taps
Sent 2 email still no reply. want one my zip f.brandi@mchsi.com zip is 61265
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 2
- Joined: Sun Feb 03, 2019 8:59 am
- First Name: Chris
- Last Name: Kramer
- * REQUIRED* Type and Year of Model Ts owned: 1909 Touring, 1913 Touring, 1914 Touring, 1914 Speedster, 1921 Coupe
- Location: Woodstock, ON
- Board Member Since: 2005
Re: UPDATE on 13/32x16 Taps
Sent you another email Dan. Hopefully this one comes through
-
Topic author - Posts: 4111
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: UPDATE on 13/32x16 Taps
Guys: The taps are all spoken for. I will let you know if there are any back outs. Thanks Dan
-
- Posts: 805
- Joined: Sun Jan 06, 2019 11:44 am
- First Name: Scott
- Last Name: Clements
- Location: Waynetown Indiana
- MTFCA Number: 49592
Re: UPDATE on 13/32x16 Taps
Dan, how about a die?