Spacer for Model A crankshaft in T block F/S

Post parts wanted or for sale here

Topic author
Layden Butler
Posts: 546
Joined: Mon Jan 07, 2019 5:39 pm
First Name: Layden
Last Name: Butler
Location: Danville CA

Spacer for Model A crankshaft in T block F/S

Post by Layden Butler » Wed Jan 08, 2020 7:22 pm

Aluminum spacer used when installing a Model A crankshaft in a Model T Ford block. $25, domestic postage $8.
Attachments
spacer 1b.jpg
spacer 1a.jpg
000 respond to.jpg


Matt_A_1926
Posts: 20
Joined: Thu Jan 10, 2019 11:04 pm
First Name: Matt
Last Name: Atchinson
Location: N.Y.

Re: Spacer for Model A crankshaft in T block F/S

Post by Matt_A_1926 » Fri Jan 10, 2020 6:51 pm

Layden, is this the spacer you use to set the higs head back and also you'll have to move the front a bit as well?


Topic author
Layden Butler
Posts: 546
Joined: Mon Jan 07, 2019 5:39 pm
First Name: Layden
Last Name: Butler
Location: Danville CA

Re: Spacer for Model A crankshaft in T block F/S

Post by Layden Butler » Thu Jan 16, 2020 5:42 pm

Hogs head stays where it is. The block moves forward on the pan.

Post Reply Previous topicNext topic