WTB Driving plate 25 back

Post parts wanted or for sale here

Topic author
keen25
Posts: 75
Joined: Wed Jan 09, 2019 5:14 pm
First Name: Eric
Last Name: Keenan
Location: Vineland, NJ

WTB Driving plate 25 back

Post by keen25 » Wed Apr 22, 2020 7:35 pm

I am looking for a good 1925 back driving plate. thank you Erick


Joe Bell
Posts: 360
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: WTB Driving plate 25 back

Post by Joe Bell » Thu Apr 23, 2020 7:36 am

Are you looking for the one that used the screws instead of bolts and for the improved narrow brake drum with the removable lugs?


Topic author
keen25
Posts: 75
Joined: Wed Jan 09, 2019 5:14 pm
First Name: Eric
Last Name: Keenan
Location: Vineland, NJ

Re: WTB Driving plate 25 back

Post by keen25 » Thu Apr 23, 2020 9:12 am

I have the narrow brake drum with the removable lugs, also the ones with the screws. thank you Erick


FATMAN
Posts: 654
Joined: Sat Jan 19, 2019 9:28 am
First Name: ROBERT
Last Name: BERGSTADT
Location: LOVES PARK IL
MTFCA Number: 1575

Re: WTB Driving plate 25 back

Post by FATMAN » Thu Apr 23, 2020 9:16 am

there are two types one with the flat bottom for 1925-27 and one with a lip on the bottom for 1909-24, I have one late one for sale and many early ones, Bob


Topic author
keen25
Posts: 75
Joined: Wed Jan 09, 2019 5:14 pm
First Name: Eric
Last Name: Keenan
Location: Vineland, NJ

Re: WTB Driving plate 25 back

Post by keen25 » Thu Apr 23, 2020 3:10 pm

Hi Bob, I need the one with the lip for the smaller 25 back drum but it needs to have the same bolt pattern / bolt circle as the wider brake drum as the 26 / 27. thank you. Erick


Joe Bell
Posts: 360
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: WTB Driving plate 25 back

Post by Joe Bell » Thu Apr 23, 2020 3:51 pm

All the ones I have tore down have long gated holes with screw headed bolts for clearance, if you use regular bolts your socket will not fit. The 26-7 style is made to be centered with the big drum, so all you need to do with the earlier driven plate is long gate the holes to make the pattern smaller diameter. Hope this helps.


Topic author
keen25
Posts: 75
Joined: Wed Jan 09, 2019 5:14 pm
First Name: Eric
Last Name: Keenan
Location: Vineland, NJ

Re: WTB Driving plate 25 back

Post by keen25 » Thu Apr 23, 2020 3:58 pm

Thank you Joe, I may need to do that.

Post Reply Previous topicNext topic