BOSCH outside magneto mount for sale

Post parts wanted or for sale here

Topic author
Dropacent
Posts: 1417
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
Location: Norwalk Ohio

BOSCH outside magneto mount for sale

Post by Dropacent » Tue Oct 13, 2020 6:39 pm

I recently bought this nice magneto shelf from Ben J.( THANKS BENJI) I am going to make what will probably be a one-time run of these. Pretty neat setup, great to mount the magneto ( whatever brand you decide ) and allows use of generator in original spot. Neat speedster item. I’m going to offer just the three raw castings ( aluminum shelf, 2 brass lever arms) for $200ppd, or a machined and drilled casting, with the arms installed, ready to mount, ppd for $300. ******* PLEASE READ CAREFULLY.*******. I am going to leave the slots out of the shelf. It’ll be up to you to locate them. I can mark them if requested. The slots were for the original chain drive to allow tightened gas up the chain, but most likely these will be run with a cogged belt , also up to you to figure out. Art has a neat booklet that will be a help. I don’t need any money up front, and it’ll take me a couple months to turn them around. Probably ready for your Xmas $$$. When ready, I’ll notify you, but you can certainly change your mind and back out. No problem with that. I’ll wait a week to see if anyone is interested. Drop me a line, tmorsher@icloud.com , just that you might like one, kit or complete.
52B8B3CC-C67B-4EF3-BD7A-102D094C3563.jpeg
166302B4-4CD6-4F95-9472-2A07C026758C.jpeg
5ADF8230-8A5F-4658-A9FE-23C9E30DC178.jpeg
85026643-C0DB-445C-8A88-1958CA8768C9.jpeg
839BDF2B-89B4-4F03-8DCE-A7F51293F957.jpeg


Topic author
Dropacent
Posts: 1417
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
Location: Norwalk Ohio

BOSCH outside magneto mount for sale

Post by Dropacent » Tue Oct 13, 2020 9:18 pm

This pic shows where it mounts
49873D17-0B84-4B5B-9BB9-45D1E5BEA154.jpeg


Topic author
Dropacent
Posts: 1417
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
Location: Norwalk Ohio

Re: BOSCH outside magneto mount for sale

Post by Dropacent » Wed Oct 14, 2020 8:00 am

A bit more info
50E9ADDE-478B-457F-961A-0BCF009541D9.png
C92CAADA-8791-4DBC-B4CA-6718FB31A74C.png
36521759-A3DC-41ED-B973-3B3B8F0A7218.png
6EC15B5F-0C44-4765-87FE-F041493549D4.png
A0F6819B-AA55-43D9-8918-E5EC7028FDDF.png

User avatar

Henry K. Lee
Posts: 3388
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: BOSCH outside magneto mount for sale

Post by Henry K. Lee » Wed Oct 14, 2020 9:08 am

Very nice!!!!!!


dmdeaton
Posts: 274
Joined: Mon Oct 21, 2019 9:43 pm
First Name: Danny
Last Name: Deaton
Location: Ohio

Re: BOSCH outside magneto mount for sale

Post by dmdeaton » Thu Oct 15, 2020 7:24 pm

I agree with Hank
I like

User avatar

Mark Chaffin
Posts: 1190
Joined: Sat Jan 12, 2019 12:11 pm
First Name: Mark
Last Name: Chaffin
Location: Corona
MTFCA Number: 31705
Board Member Since: 2001

Re: BOSCH outside magneto mount for sale

Post by Mark Chaffin » Thu Oct 15, 2020 10:59 pm

This would work great with a dual ignition set up. Run a distributor off the front and the mag on the side! Tim makes great products at a fair price. You have my endorsement my friend! :)


Topic author
Dropacent
Posts: 1417
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
Location: Norwalk Ohio

Re: BOSCH outside magneto mount for sale

Post by Dropacent » Thu Oct 29, 2020 8:55 pm

These are in the works. One time only project. 3 are spoken for, and I only ordered 5 total. If interested , let me hear from you. No money needed until ready to ship. $200 for the cast8mg, $300 ready to bolt on. Tmorsher@icloud.com.

User avatar

Michael Peternell
Posts: 235
Joined: Sun Jan 06, 2019 11:00 am
First Name: Michael
Last Name: Peternell
Location: Avon mn

Re: BOSCH outside magneto mount for sale

Post by Michael Peternell » Thu Oct 29, 2020 9:20 pm

Only one left if Tim got my email.

Post Reply Previous topicNext topic