Anybody have a decent ‘12-‘17 pan available?
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Anybody have a decent ‘12-‘17 pan available?
I am looking for any good “taper nosed” ‘12-‘17 engine pan. I’m working on a ‘12. The existing original pan has “3 rivet” style arms and a “teacup” oil drain. Finding a very good “3 rivet” or “7 rivet” ‘12 pan would be ideal, HOWEVER, it isn’t going in a car that will be judged and we would be happy with a real nice ‘13-‘17 pan if we can get one fairly quick. Within driving distance of Milwaukee or Madison, WI would be ideal.
I do have one lined up for Chickasha, but prefer not to wait that long.
I will be at the 2/24/19 West Bend, WI Model A Club swap meet for a couple hours Sunday morning. Just mentioning this because I know quite a few T hobbyists attend this one... I won’t have a space “just visiting” (maybe 8-10). Thanks!
I do have one lined up for Chickasha, but prefer not to wait that long.
I will be at the 2/24/19 West Bend, WI Model A Club swap meet for a couple hours Sunday morning. Just mentioning this because I know quite a few T hobbyists attend this one... I won’t have a space “just visiting” (maybe 8-10). Thanks!
-
- Posts: 193
- Joined: Sun Jan 06, 2019 11:31 pm
- First Name: Ricky
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 11 Torpedo, 12 Com. Rdstr, 12 Delivery, 2-12 Tou, 15 Tou, 21 Cpe, 25 Cpe 25 TT, 26 TT, 27TT, 26 PU, 26 Tou, 2-26 4dr, 26 Del, 27 4dr
- Location: Humboldt, TN
- MTFCA Number: 28991
- MTFCI Number: 23852
- Contact:
Re: Anybody have a decent ‘12-‘17 pan available?
Adam, I have a really good 3 rivet pan and I am looking for a 7 rivet 1912 pan to replace it with. If you come across a 7 rivet pan I would love to swap and give you a little extra.
Richard Williams, Humboldt, TN
President, Tennessee T's inc.
President, Tennessee T's inc.
-
- Posts: 1930
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Anybody have a decent ‘12-‘17 pan available?
I have a nice pan removed from my car, built in Sept 1916. I believe it is what is referred to as a 7 rivet. The day before I broke my ankle I sprayed Zinc chromate primer on the outside and coated the inside with WD 40, thinking I might sell it when I figured out what was a fair asking price. I've seen them sell for some pretty hefty prices but don't want to gouge anyone. I'm in the Thumb of Michigan, 45 minutes North of Port Huron (the bottom of Lake Huron) so not really in range of either of you.
Wish I had a better picture of it. The fellow who rebuilt my engine soda-blasted it in preparation for reinstallation before I decided to go another way, thus the need for Zinc chromate, etc. I do have a three-dip cover for it with brackets. Sorry I can't be more helpful.
Wish I had a better picture of it. The fellow who rebuilt my engine soda-blasted it in preparation for reinstallation before I decided to go another way, thus the need for Zinc chromate, etc. I do have a three-dip cover for it with brackets. Sorry I can't be more helpful.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
- Posts: 4308
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: Anybody have a decent ‘12-‘17 pan available?
Tim - 7 rivet refers to the number of rivets that attach the c.c arms to the c.c.
-
- Posts: 1930
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Anybody have a decent ‘12-‘17 pan available?
Ahhhh! I learn something every day. When my buddy comes over next week I'll ask him to take a couple pix for me so I know exactly what I've got.
Thanks!
Thanks!
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Anybody have a decent ‘12-‘17 pan available?
Hi Tim, I’m interested. Please email me with more details. I believe you have my email. Thanks! -Adam.
-
- Posts: 166
- Joined: Sun Jan 06, 2019 11:13 pm
- First Name: Jim, Sr.
- Last Name: Rodell
- * REQUIRED* Type and Year of Model Ts owned: 1922 coupe, 1926 touring
- Location: Wisconsin
- MTFCA Number: 2406
- MTFCI Number: 22213
Re: Anybody have a decent ‘12-‘17 pan available?
Adam, can't the original pan be fixed?
1922 Coupe , 1926 Touring
-
- Posts: 1053
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: Anybody have a decent ‘12-‘17 pan available?
I have 8 narrow nose pans, you can come and take your pick, 100-150, there is one seven rivet but it needs some work, front rivets loose and the threads are stripped out on the tea cup.
-
- Posts: 777
- Joined: Mon Jan 07, 2019 11:04 pm
- First Name: Bob
- Last Name: Middleton
- * REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
- Location: Western nv
Re: Anybody have a decent ‘12-‘17 pan available?
Adam or anyone else I have a 3 rivet pan
Oil but good shape if no interest I put it back in my 18 next winter
Oil but good shape if no interest I put it back in my 18 next winter
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Anybody have a decent ‘12-‘17 pan available?
Bob and Joe, I would prefer to see a pan in person before I buy it. I’m in Southeastern Wisconsin. If you were going to Chickasha and could bring it along, we could meet up there. Thanks.
-
- Posts: 1053
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: Anybody have a decent ‘12-‘17 pan available?
Sorry Adam, been there and was not worth the 1500 mile trip one way, there was stuff there that they where trying to sell that my scrap pile looked better. Will never go back!
-
- Posts: 4308
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- MTFCA Number: 14972
- MTFCI Number: 15411
- Board Member Since: 2001
Re: Anybody have a decent ‘12-‘17 pan available?
I'm with you Joe - we drove from Washington State a few years ago - there was nothing there that I don't have in my shop & container !
-
- Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Anybody have a decent ‘12-‘17 pan available?
Not to take any sales away, but what is wrong with your pan?
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 777
- Joined: Mon Jan 07, 2019 11:04 pm
- First Name: Bob
- Last Name: Middleton
- * REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
- Location: Western nv
Re: Anybody have a decent ‘12-‘17 pan available?
To far but you find a ride i send it that way
If unhappy just arrange a ride back
If unhappy just arrange a ride back
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Anybody have a decent ‘12-‘17 pan available?
Mark, The original pan has old large weld repairs to the nose, 1 arm, and corners. The inside corners have cracks that extend a few inches into the sump that have been previously welded, cracked again, brazed, and cracked again. The inside of the pan at the arms have similar repairs. Plus, there is a long “wrinkle” in the pan that was maybe a stamping error that could be a source for future trouble. I can properly repair the existing pan, but proper repair isn’t cost effective.
-
- Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Anybody have a decent ‘12-‘17 pan available?
Yikes! I asked because others may be wondering also. Keep your eyes on Ebay also, I did see you want to check it out first, but sometimes it doesn't work out that way and you may have to rely on photos and description.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 1053
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: Anybody have a decent ‘12-‘17 pan available?
Mike Bird, I did not get an email address with your message. Joe
-
- Posts: 1086
- Joined: Sun Jan 06, 2019 6:51 pm
- First Name: Mike
- Last Name: Bird
- * REQUIRED* Type and Year of Model Ts owned: 1912 Delivery Car
- Location: Goshen IN
Re: Anybody have a decent ‘12-‘17 pan available?
Joe,
I resent the message with my email
Thanks Mike Bird
I resent the message with my email
Thanks Mike Bird
-
- Posts: 65
- Joined: Thu Jan 17, 2019 6:55 pm
- First Name: James
- Last Name: Rodell
- Location: Kewaskum
- MTFCA Number: 14035
- MTFCI Number: 13594
Re: Anybody have a decent ‘12-‘17 pan available?
What is the value of a good 13-17 pan?
-
- Posts: 1053
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: Anybody have a decent ‘12-‘17 pan available?
15-17 100-150 11-12 pan 500-1200
-
- Posts: 3284
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Number: 121
- MTFCA Life Member: YES
- MTFCI Number: 16310
Re: Anybody have a decent ‘12-‘17 pan available?
There are three different style pans used in 1913! It's good to know what you are looking for!
-
Topic author - Posts: 1411
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Anybody have a decent ‘12-‘17 pan available?
Smith, The original post and my follow-up states exactly what I’m looking for.