I have a Hempy Cooper boring unit for the early Fordson tractors that I would like to sell. Anyone know of a Early Fordson site where I can list it? I have looked but only come up with later Ford tractor sites.
Have a main bearing pouring jig to go with it, but it is not Hempy Cooper. Thanks Dan
Fordson info needed
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
John kuehn
- Posts: 4433
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Fordson info needed
Here’s the Fordson collectors site.
https://thefordsonhouse.com/
They are always looking for Fordson parts. Call them for more info.
I sold some Fordson parts a few years ago.
https://thefordsonhouse.com/
They are always looking for Fordson parts. Call them for more info.
I sold some Fordson parts a few years ago.
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Fordson info needed
Back to the top
-
George House
- Posts: 2814
- Joined: Sun Jan 06, 2019 5:25 pm
- First Name: George
- Last Name: House
- * REQUIRED* Type and Year of Model Ts owned: ‘10 Maxwell AA, ‘11Hupp Model 20, Two 1914 Ford runabouts, 19 centerdoor, 25 C Cab,26 roadster
- Location: Northern Caldwell County TX
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: Fordson info needed
You don’t need the Fordson House Dan. Go to forums.yesterdaystractors.com you’ll find Fordson experts there. Be sure to state ‘Model F’
A Fine is a Tax for Doing Something Wrong….A Tax is a Fine for Doing Something RIGHT 
-
kevinf
- Posts: 130
- Joined: Sun Jan 13, 2019 9:17 pm
- First Name: Kevin
- Last Name: Fielding
- Location: Ewe-taw
Re: Fordson info needed
Dan,
Here is another link to Smokestack, it is a forum for steel wheel tractors, and they have a classified section as well.
A post to the forum may get you some options.
It is pretty active but nothing like the MTFCA.
Good Luck,
Kevin
https://www.smokstak.com/forum/forums/a ... actors.22/
Here is another link to Smokestack, it is a forum for steel wheel tractors, and they have a classified section as well.
A post to the forum may get you some options.
It is pretty active but nothing like the MTFCA.
Good Luck,
Kevin
https://www.smokstak.com/forum/forums/a ... actors.22/
-
Dan Hatch
Topic author - Posts: 5009
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
Re: Fordson info needed
Thanks for the info. I need to get these things to someone who will use them. Dan