1911 to early 1913 Closed Driveshaft Spool

Post parts wanted or for sale here

Topic author
moozark
Posts: 25
Joined: Tue Jan 15, 2019 8:38 pm
First Name: Rick
Last Name: Gunter
Location: Springfield, MO

1911 to early 1913 Closed Driveshaft Spool

Post by moozark » Tue Jun 25, 2019 2:09 pm

This is an early closed driveshaft spool. I sold this one a few years ago as a 1910. The man who bought returned it and said it was not quite right for 1910 but would work for 1911 to early 1913. So, I'm not sure. It does NOT have a raised letter part number on the casting. The number "10" painted on the side was put there by a previous owner. He thought it was for a 1910. $45.00 + 12.00 shipping. Please pay by PayPal.
ModelT1910_Spool_0002.JPG
ModelT1910_Spool_0002.JPG (41.54 KiB) Viewed 990 times
ModelT1910_Spool_0003.JPG
ModelT1910_Spool_0003.JPG (44.32 KiB) Viewed 990 times
ModelT1910_Spool_0001.JPG
ModelT1910_Spool_0001.JPG (46.22 KiB) Viewed 990 times


Philip Lawrence
Posts: 67
Joined: Thu Jan 10, 2019 11:42 am
First Name: Philip
Last Name: Lawrence
Location: Auburn, CA
MTFCA Number: 5591
Board Member Since: 2014

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by Philip Lawrence » Tue Jun 25, 2019 4:51 pm

Sent pm.

User avatar

Oldav8tor
Posts: 469
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Juhl
Location: Thumb of Michigan
MTFCA Number: 50297
MTFCI Number: 24810

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by Oldav8tor » Tue Jun 25, 2019 5:21 pm

Looks a lot like the spool from my 1917.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep
1953 Ford Jubilee Tractor


Topic author
moozark
Posts: 25
Joined: Tue Jan 15, 2019 8:38 pm
First Name: Rick
Last Name: Gunter
Location: Springfield, MO

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by moozark » Tue Jun 25, 2019 5:53 pm

Philip Lawrence wrote:
Tue Jun 25, 2019 4:51 pm
Sent pm.
Philip Lawrence, I have not received any PM from you.

User avatar

RajoRacer
Posts: 1024
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by RajoRacer » Tue Jun 25, 2019 7:05 pm

It's "early" as it has no bump outs by the stud holes on the end that goes into the rear axle.

User avatar

Walter Higgins
Posts: 133
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Walter
Last Name: Higgins
Location: Realville, PA
MTFCA Number: 396
MTFCA Life Member: YES
MTFCI Number: 153

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by Walter Higgins » Tue Jun 25, 2019 7:07 pm

Settle things with Philip first, but in the event he doesn't come through, I'd like to be next.


Topic author
moozark
Posts: 25
Joined: Tue Jan 15, 2019 8:38 pm
First Name: Rick
Last Name: Gunter
Location: Springfield, MO

Re: 1911 to early 1913 Closed Driveshaft Spool

Post by moozark » Wed Jul 10, 2019 4:09 pm

This drive shaft spool has been sold.

Post Reply Previous topicNext topic