I am hoping to purchase at least 5 excellent covers...originals
the originals are apparently tapped 12mm x 1 and are embossed "Schrader" and are 2 3/8" long
the copies are tapped 1/2 - 24 and while they are embossed "Schrader" they are pretty much incorrectly made and are too long, and do not fit period hardware (threads are too large and sloppy)
To date, I have been blessed with great hardware from forum members, including some NOS stuff. I am hoping to round out this effort with the purchase of these covers in excellent/NOS condition if possible...what do you have that is gathering dust?
The top cover is what I am looking for
The bottom cover is NOT what I am looking for
thank you for your looking at this ad
scott
WTB - excellent original Schrader Valve Stem Covers
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
WTB - excellent original Schrader Valve Stem Covers
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 146
- Joined: Sun Jan 06, 2019 7:28 pm
- First Name: Dale
- Last Name: Kemmerer
- * REQUIRED* Type and Year of Model Ts owned: 1909 touring 1911 open runabout
- Location: Medford, OR1909
Re: WTB - excellent original Schrader Valve Stem Covers
Scott, l have em, probably you would need to replete them. Do you need the rim washer as well?
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - excellent original Schrader Valve Stem Covers
Hi Dale!
I was able to find a batch of NOS rim washers already, but would still be interested in seeing what you have. If you wouldn't mind sending a couple of pictures to my email, that would be great. Thank you for responding!
I was able to find a batch of NOS rim washers already, but would still be interested in seeing what you have. If you wouldn't mind sending a couple of pictures to my email, that would be great. Thank you for responding!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured