FS "Escutcheon" Plates
-
Topic author - Posts: 645
- Joined: Sun Jan 06, 2019 10:45 am
- First Name: David
- Last Name: Stroud
- Location: Mound City, MO. 64470
- Board Member Since: 2011
FS "Escutcheon" Plates
FS Grab bag of escutcheon plates (for lack of a better term) and brackets. One #4002 clasp for hood rod on radiator, (repro) one clasp that I think is for a wood firewall for the center hood rod, (original) one #4127A carb adjusting bezel plate, steel '13-'21 (original), one steel bezel that I don't know what it's for, but came off of a wood firewall I think, measures about 2 5/8"long x about 13/16'" wide with a slot 2'" long, and one E Brake lever trim #3633, '19-'25, original. $20.00 for the lot plus shipping. I can text pictures, that's the only way I can. Dave
1925 mostly original coupe.
-
- Posts: 152
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- Location: Salem, Virginia
- MTFCA Number: 50618
- Board Member Since: 2018
Re: FS "Escutcheon" Plates
Message sent
-
- Posts: 23
- Joined: Sun Jan 06, 2019 1:53 pm
- First Name: Warren
- Last Name: Webb
- Location: Owasso
Re: FS "Escutcheon" Plates
email sent
-
Topic author - Posts: 645
- Joined: Sun Jan 06, 2019 10:45 am
- First Name: David
- Last Name: Stroud
- Location: Mound City, MO. 64470
- Board Member Since: 2011
Re: FS "Escutcheon" Plates
Never heard anything back from Warren, so these are again available. Dave
1925 mostly original coupe.
-
Topic author - Posts: 645
- Joined: Sun Jan 06, 2019 10:45 am
- First Name: David
- Last Name: Stroud
- Location: Mound City, MO. 64470
- Board Member Since: 2011
Re: FS "Escutcheon" Plates
$12.50 plus shipping. As I said, I can text pictures, that's the only way I can. Dave
1925 mostly original coupe.
-
- Posts: 22
- Joined: Sun Jan 06, 2019 7:37 pm
- First Name: Mark
- Last Name: Wetherbee
- Location: Coastal NC
Re: FS "Escutcheon" Plates
Thank you David, I was hoping for the inside door trim from a sedan but appreciate the pictures.
There is no such thing as a “free” lunch... 

-
Topic author - Posts: 645
- Joined: Sun Jan 06, 2019 10:45 am
- First Name: David
- Last Name: Stroud
- Location: Mound City, MO. 64470
- Board Member Since: 2011
Re: FS "Escutcheon" Plates
These are nice original pieces except for the repo one. The E brake floor trim does have some minor rust pitting, but could be made to look very nice with a bit of work or use as is for survivor or? Dave
1925 mostly original coupe.
-
Topic author - Posts: 645
- Joined: Sun Jan 06, 2019 10:45 am
- First Name: David
- Last Name: Stroud
- Location: Mound City, MO. 64470
- Board Member Since: 2011
Re: FS "Escutcheon" Plates
Surely someone can use these, they really do need to go to a good home.
Dave

1925 mostly original coupe.
-
- Posts: 2
- Joined: Fri Nov 22, 2019 9:34 am
- First Name: Rick
- Last Name: Miller
- Location: Southeast Michigan
- Board Member Since: 2015
Re: FS "Escutcheon" Plates
Dave, do you still have my cell #....send me pics please.
Rick
Rick