New tool
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 263
- Joined: Sun Jan 06, 2019 2:50 pm
- First Name: DEAN
- Last Name: YODER
- * REQUIRED* Type and Year of Model Ts owned: 19tour,24tour,25rdpu,27rd.26coupe,TT's,& tractor conversions
- Location: Iowa
- MTFCA Number: 295
- MTFCA Life Member: YES
- MTFCI Number: 127
- Board Member Since: 1999
New tool
Out of 7 output shafts 4 had loose r404F477D20A2ABC2.jpeg[/attachment]
-
- Posts: 1057
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: New tool
And they are usually the 26-7 ones!
-
Topic author - Posts: 263
- Joined: Sun Jan 06, 2019 2:50 pm
- First Name: DEAN
- Last Name: YODER
- * REQUIRED* Type and Year of Model Ts owned: 19tour,24tour,25rdpu,27rd.26coupe,TT's,& tractor conversions
- Location: Iowa
- MTFCA Number: 295
- MTFCA Life Member: YES
- MTFCI Number: 127
- Board Member Since: 1999
Re: New tool
They were all 26/27 . Why do they fail? Wider brake bands??
-
- Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: New tool
Dean: What I have been finding is that if the rivets are not loose then the driven plate will be cracked. Does not matter if wide or narrow.
I think it has to do with 4th main alignment. Pan straightness.
I think it has to do with 4th main alignment. Pan straightness.
-
- Posts: 199
- Joined: Mon Jan 07, 2019 6:04 pm
- First Name: Jim
- Last Name: Eubanks
- * REQUIRED* Type and Year of Model Ts owned: 1926 touring, 1927 cpe
- Location: Powell, TN
- MTFCA Number: 49847
- MTFCI Number: 8340
Re: New tool
I had the same problem and had a hard time finding a replacement, finally got one off ebay. I am tempted to re rivit the old one and weld it.
-
Topic author - Posts: 263
- Joined: Sun Jan 06, 2019 2:50 pm
- First Name: DEAN
- Last Name: YODER
- * REQUIRED* Type and Year of Model Ts owned: 19tour,24tour,25rdpu,27rd.26coupe,TT's,& tractor conversions
- Location: Iowa
- MTFCA Number: 295
- MTFCA Life Member: YES
- MTFCI Number: 127
- Board Member Since: 1999
Re: New tool
I just received oversized rivets. I will drill and er rivet should be better than new.
-
- Posts: 1319
- Joined: Thu Jan 10, 2019 5:47 pm
- First Name: Les
- Last Name: Schubert
- * REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
- Location: Calgary
Re: New tool
The problem you are talking about is why I developed the “floating transmission shaft “. It significantly reduces the loads.
Dan Hatch is who I have licensed to make it.
Dan Hatch is who I have licensed to make it.