Wanted front hub ball bearing parts

Post parts wanted or for sale here
User avatar

Topic author
Mark Gregush
Posts: 4957
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Wanted front hub ball bearing parts

Post by Mark Gregush » Fri Jan 10, 2020 12:14 pm

I am looking for the following;

2 2805 inner race

2 2804 outer race

1 or 2 2704 inner stationary cones

Left and right outer adjustable cones (Lang's list those)

I am looking for NOS or very close. These are going in the hubs of a 1912. I have the balls and retainers. I sent a note to Steve at Lang's and am also post here. I have in a pinch that I could use with rework the 2 outer races but would like better.
Thanks
Mark Gregush
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup


Nv Bob
Posts: 777
Joined: Mon Jan 07, 2019 11:04 pm
First Name: Bob
Last Name: Middleton
* REQUIRED* Type and Year of Model Ts owned: 18 roadster 1810 brand X
Location: Western nv

Re: Wanted front hub ball bearing parts

Post by Nv Bob » Fri Jan 10, 2020 2:48 pm

Sent email
Reply back i get pics to you
Jalopyt@yahoo.com
Bob

User avatar

KWTownsend
Posts: 1122
Joined: Mon Jan 07, 2019 6:51 pm
First Name: Keith
Last Name: Townsend
* REQUIRED* Type and Year of Model Ts owned: late 1911 touring, 1915 runabout, 1919 touring, brass speedster
Location: Gresham, Orygun
MTFCA Number: 14778
MTFCA Life Member: YES
MTFCI Number: 16305
Board Member Since: 1999

Re: Wanted front hub ball bearing parts

Post by KWTownsend » Mon Jan 13, 2020 10:51 am

Mark,
I have a coffee can full of ball bearing parts.
Give me a call.
Keith

User avatar

Topic author
Mark Gregush
Posts: 4957
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Wanted front hub ball bearing parts

Post by Mark Gregush » Mon Jan 13, 2020 11:56 am

Thank you Keith. I have been in contact with Bob and am checking again today with Lang's. They show limited stock of NOS races on line.
Side note; I have two inner that could be reworked, not outer.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup

User avatar

dobro1956
Posts: 1285
Joined: Sun Jan 06, 2019 10:13 pm
First Name: Donnie
Last Name: Brown
* REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
Location: Hills of Arkansas
MTFCA Number: 49575

Re: Wanted front hub ball bearing parts

Post by dobro1956 » Mon Jan 13, 2020 1:17 pm

I sold Lange several cans of NOS ball bearing parts last year at Chickasha. There were inner and outer cones as well as cups and retainer rings. They should have what you need,unless they have already sold.

User avatar

Topic author
Mark Gregush
Posts: 4957
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Wanted front hub ball bearing parts

Post by Mark Gregush » Tue Jan 14, 2020 9:49 pm

Thanks everyone. For now I have the races/cups coming from Lang's. Donnie they might be from the stash you sold them.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup

User avatar

dobro1956
Posts: 1285
Joined: Sun Jan 06, 2019 10:13 pm
First Name: Donnie
Last Name: Brown
* REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
Location: Hills of Arkansas
MTFCA Number: 49575

Re: Wanted front hub ball bearing parts

Post by dobro1956 » Wed Jan 15, 2020 12:29 am

Mark, I have sold quite a bit of NOS parts to Langs. I came into an estate buy that had a very large amount of NOS parts. Lang's will be able to get a lot more of it into hands of people who need it way more than I ever would. Glad you found what you needed.

Post Reply Previous topicNext topic