[image][/image][image][image][/image][/image]I have two crank shaft aligning reamers. The first one is Steven reamer part#3031-2-3-9. The second one was manufactured by Mayhew part# 3031-2-3. The price on the Stevens is$75 plus postage. The price on the Mayhew is $65 plus postage. Both of these reamer have been stored in wooden boxes. The cutter have been wrap in grease soaked rags.
Thanks
Fitz
Boring bars
-
Ralph F
Topic author - Posts: 139
- Joined: Wed Jan 09, 2019 7:09 pm
- First Name: Ralph
- Last Name: Fitz-Gerald
- Location: Monkton, Vermont
Boring bars
- Attachments
-
-
-
Ralph F
Topic author - Posts: 139
- Joined: Wed Jan 09, 2019 7:09 pm
- First Name: Ralph
- Last Name: Fitz-Gerald
- Location: Monkton, Vermont
Re: Boring bars
New price $75 for both plus postage.
Fitz
Fitz
-
Ahr
- Posts: 19
- Joined: Wed Jan 09, 2019 9:57 pm
- First Name: Adam
- Last Name: Hubacz
- * REQUIRED* Type and Year of Model Ts owned: 1923 speedster
- Location: North Brookfield Massachusetts
Re: Boring bars
Email sent
-
mike atkins
- Posts: 4
- Joined: Mon Jan 07, 2019 10:31 am
- First Name: mike
- Last Name: atkins
- * REQUIRED* Type and Year of Model Ts owned: 1926 roadster, 1926 tudor sedan
- Location: tulsa, ok
Re: Boring bars
Are the Reamers still available?