WTB, original Universal Ball Cap Screws, T-3371

Post parts wanted or for sale here
User avatar

Topic author
Pep C Strebeck
Posts: 519
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI
MTFCA Number: 0

WTB, original Universal Ball Cap Screws, T-3371

Post by Pep C Strebeck » Sat Feb 08, 2020 9:01 pm

Just as the subject line says, I am in need of at least 4 (preferably 6) good, original cap screws for the Universal Joint Ball Cap. These are the 2 lower bolts with the cross-drilled heads for the safety wire, T-3371, 3/8-24 x 13/16. I set these aside so I would not lose them, and as with most folks, I didn't lose them, I just can't find them. Please let me know what you might have available, you can contact me through a Private Message here on the Forum or through e-mail. A Private Message has more of a guarantee of being seen, e-mails from Forum members always seem to go into my spam folder. Thanks for looking and for any help, Joe.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.


Steve Robbins
Posts: 31
Joined: Mon Jan 07, 2019 6:13 pm
First Name: Robert
Last Name: Robbins
* REQUIRED* Type and Year of Model Ts owned: 1926 roadster pickup, 1926 tudor sedan
Location: 504 W. 5th
MTFCA Number: 30323
Board Member Since: 2012

Re: WTB, original Universal Ball Cap Screws, T-3371

Post by Steve Robbins » Sun Feb 09, 2020 12:27 pm

I did the same thing! Finally got the rearend together and installed but when I looked for the bolts, They are nowhere to be found! So I used some temps till I find them! That should teach me to not cleanup all the nuts, Washers, bolts, and cotter pins.STEVE

User avatar

Topic author
Pep C Strebeck
Posts: 519
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI
MTFCA Number: 0

Re: WTB, original Universal Ball Cap Screws, T-3371

Post by Pep C Strebeck » Mon Feb 10, 2020 11:25 am

nancydrew1.jpg
nancydrew1.jpg (84.02 KiB) Viewed 1922 times
Thought it was better than 10 characters. Still looking.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.

User avatar

Topic author
Pep C Strebeck
Posts: 519
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI
MTFCA Number: 0

Re: WTB, original Universal Ball Cap Screws, T-3371

Post by Pep C Strebeck » Wed Feb 12, 2020 1:49 pm

haystack.jpg
haystack.jpg (27.44 KiB) Viewed 1851 times
Success! Replacements are on the way and I am sure that someday in the future I may find the ones I set aside so I would not lose them.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.

Post Reply Previous topicNext topic