FS: Speedster steering column, brass

Post parts wanted or for sale here

Topic author
Chad_Marcheese
Posts: 200
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
MTFCA Number: 26904
Board Member Since: 2005

FS: Speedster steering column, brass

Post by Chad_Marcheese » Wed Feb 12, 2020 8:30 pm

.

SOLD SOLD SOLD!


Steering column from a speedster project that changed direction.
Length is still standard, so can be used in regular car
New pitman arm
New key
New nut
New grease cup.
Excellent used timing / spark rods
New control rod springs and cups
New gears (4:1)
New brass quadrant
New brass nut for the steering wheel
Polished gear case (black originally)
Paint has been sanded back for second coat (Black appliance paint)
Brass could use some finer finishing and polishing
Steering bracket (T932-B) has been rebushed.

This column needs very little finishing touches to complete. $200 plus shipping.

I go off the first person that contacts me by IM or email (safest bet) crazydart400 AT yahoo DOT com. Paypal is preferred, will also accept check or M/O but will have to clear first.
Column 1.jpeg
Column 1.jpeg (98.39 KiB) Viewed 506 times
Column 2.jpeg
Column 2.jpeg (106.39 KiB) Viewed 506 times
Column 3.jpeg
Column 3.jpeg (66.63 KiB) Viewed 506 times
Column 4.jpeg
Column 4.jpeg (101.96 KiB) Viewed 506 times
Column 5.jpeg
Column 5.jpeg (86.68 KiB) Viewed 506 times
Last edited by Chad_Marcheese on Wed Feb 12, 2020 9:22 pm, edited 3 times in total.


Topic author
Chad_Marcheese
Posts: 200
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
MTFCA Number: 26904
Board Member Since: 2005

Re: FS: Speedster steering column, brass

Post by Chad_Marcheese » Wed Feb 12, 2020 8:30 pm

Column 6.jpeg
Column 6.jpeg (70.91 KiB) Viewed 505 times


jawa
Posts: 26
Joined: Fri Jan 31, 2020 10:55 pm
First Name: Adam
Last Name: Spatto
Location: Mohawk, NY
MTFCA Number: 29387
Board Member Since: 2019

Re: FS: Speedster steering column, brass

Post by jawa » Wed Feb 12, 2020 8:41 pm

Email sent

Post Reply Previous topicNext topic