.
SOLD SOLD SOLD!
Steering column from a speedster project that changed direction.
Length is still standard, so can be used in regular car
New pitman arm
New key
New nut
New grease cup.
Excellent used timing / spark rods
New control rod springs and cups
New gears (4:1)
New brass quadrant
New brass nut for the steering wheel
Polished gear case (black originally)
Paint has been sanded back for second coat (Black appliance paint)
Brass could use some finer finishing and polishing
Steering bracket (T932-B) has been rebushed.
This column needs very little finishing touches to complete. $200 plus shipping.
I go off the first person that contacts me by IM or email (safest bet) crazydart400 AT yahoo DOT com. Paypal is preferred, will also accept check or M/O but will have to clear first.
FS: Speedster steering column, brass
-
Topic author - Posts: 253
- Joined: Tue Jan 15, 2019 6:06 am
- First Name: Chad
- Last Name: Marcheese
- * REQUIRED* Type and Year of Model Ts owned: 1925 Cut Off Touring / Pickup, 1923 Doodlebug / 1924 Speedster Gow Job
- Location: Upstate, NY
- MTFCA Number: 26904
- Board Member Since: 2005
FS: Speedster steering column, brass
Last edited by Chad_Marcheese on Wed Feb 12, 2020 9:22 pm, edited 3 times in total.
-
Topic author - Posts: 253
- Joined: Tue Jan 15, 2019 6:06 am
- First Name: Chad
- Last Name: Marcheese
- * REQUIRED* Type and Year of Model Ts owned: 1925 Cut Off Touring / Pickup, 1923 Doodlebug / 1924 Speedster Gow Job
- Location: Upstate, NY
- MTFCA Number: 26904
- Board Member Since: 2005
-
- Posts: 65
- Joined: Fri Jan 31, 2020 10:55 pm
- First Name: Adam
- Last Name: Spatto
- * REQUIRED* Type and Year of Model Ts owned: 1923 Touring, 1927 Tudor, 1913 Speedster
- Location: Mohawk, NY
- MTFCA Number: 29387
- Board Member Since: 2019
Re: FS: Speedster steering column, brass
Email sent