FS- Over 100 parts,tools, mostly T.List available

Post parts for sale here

Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Tue Jan 08, 2019 10:38 am

I now have my 2018 / 2019 Model T Parts List available .There are over 100 items,mostly Model T parts & tools. Stewart & AC speedometer parts . Lots of early horns -Manual Plunger type & electric . kLAXON,STEWART, T horns, A horns . Front w.w T hubs .Also many misc tools & parts. Most all items have been cleaned. Many of these items have been restored & work. If you would like my list - Just email me and I will attach it for you. You wont beleive all thats on the list. If you bought from me before ,you know that I sell quality parts. * I have photos available for most of the items - please ask. Sorry I don't text -just email. Sorry I only accept Pay Pal now.


Bill Serbst
Posts: 5
Joined: Sun Jan 06, 2019 11:28 am
First Name: Bill
Last Name: Serbst
Location: Bristol RI
MTFCA Number: 49936

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Bill Serbst » Tue Jan 08, 2019 1:21 pm

PM sent.


DontKnowMuch
Posts: 28
Joined: Tue Jan 08, 2019 11:13 am
First Name: James
Last Name: Sanford
Location: Lucas, TX

Re: FS- Over 100 parts,tools, mostly T.List available

Post by DontKnowMuch » Tue Jan 08, 2019 2:36 pm

Ben, PM sent requesting copy of your list.
Dennis


Scott_Conger
Posts: 1599
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Scott_Conger » Tue Jan 08, 2019 3:51 pm

Hi Ben

PM sent
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Greg Holm
Posts: 10
Joined: Tue Jan 08, 2019 1:22 pm
First Name: Gregory
Last Name: Holm
Location: Ohio

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Greg Holm » Tue Jan 08, 2019 4:07 pm

PM sent
Greg Holm
Brookville, Ohio


sweet23
Posts: 88
Joined: Sun Jan 06, 2019 1:19 pm
First Name: Darryl
Last Name: Bobzin
Location: Kannapolis,NC
MTFCA Number: 27211
Board Member Since: 2016

Re: FS- Over 100 parts,tools, mostly T.List available

Post by sweet23 » Tue Jan 08, 2019 4:19 pm

I sent a PM when you first listed this list, but I haven't got the list yet.


agriscience
Posts: 18
Joined: Sun Jan 06, 2019 2:22 pm
First Name: Steven
Last Name: Husa
Location: Rancho Cucamonga CA

Re: FS- Over 100 parts,tools, mostly T.List available

Post by agriscience » Tue Jan 08, 2019 5:25 pm

Please send a copy of the tools for the T
Thanks in advance!
Steve


Clockdoc
Posts: 26
Joined: Mon Jan 07, 2019 5:47 pm
First Name: John
Last Name: Grabowski
Location: St. Clair County, MI
MTFCA Number: 50154
Board Member Since: 2015

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Clockdoc » Tue Jan 08, 2019 6:36 pm

I would like a list please :roll:

User avatar

Brian D
Posts: 44
Joined: Sun Jan 06, 2019 7:35 pm
First Name: Brian
Last Name: Dowell
Location: St. Clair Michigan
MTFCI Number: 21554

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Brian D » Tue Jan 08, 2019 6:40 pm

My I please have a list.


Bill Anziani
Posts: 53
Joined: Sun Jan 06, 2019 2:42 pm
First Name: Bill
Last Name: Anziani
Location: Concord,NC

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Bill Anziani » Tue Jan 08, 2019 7:27 pm

Can you please send me a list as well

User avatar

Michael Peternell
Posts: 58
Joined: Sun Jan 06, 2019 11:00 am
First Name: Michael
Last Name: Peternell
Location: Avon mn

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Michael Peternell » Tue Jan 08, 2019 9:14 pm

Not sure but I also asked for a list. Nothing so for.
Hope I'm not being farmed for email.


Xet
Posts: 5
Joined: Sun Jan 06, 2019 1:59 pm
First Name: Tex
Last Name: Holtby
Location: Honeoye Falls, N Y
MTFCA Number: 29836

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Xet » Wed Jan 09, 2019 7:20 pm

Hi Ben PM sent. Thanks, Tex


Unprr
Posts: 37
Joined: Mon Jan 07, 2019 9:20 pm
First Name: George
Last Name: Schmidt
Location: Elkhorn
MTFCA Number: 49710

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Unprr » Fri Jan 11, 2019 9:38 pm

Please send me a list and price of your parts.

George

Unprr@cox.ner


Randy72
Posts: 9
Joined: Fri Jan 11, 2019 5:30 pm
First Name: Randy
Last Name: Fisher
Location: Napoleon OH
MTFCA Number: 50319
MTFCI Number: 23917
Board Member Since: 2017

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Randy72 » Sat Jan 12, 2019 1:21 pm

PM sent. No reply yet


Bill Kerndt
Posts: 9
Joined: Tue Jan 08, 2019 5:26 pm
First Name: Bill
Last Name: Kerndt
Location: Waukon, Iowa

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Bill Kerndt » Sat Jan 12, 2019 2:43 pm

Ben
I sent you a request earlier for your list. If you have already sent it please disregard, if not please send me a copy. Thank you. Bill Kerndt

kerndtengineering@gmail.com


Larry LaPatka
Posts: 28
Joined: Sun Jan 06, 2019 5:43 pm
First Name: Larry
Last Name: LaPatka
Location: Parrottsville, Tennessee
MTFCA Number: 25903

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Larry LaPatka » Sat Jan 12, 2019 4:11 pm

requested a list twice over the last two weeks and still no reply.


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 12:11 pm

Scott_conger wrote:
Tue Jan 08, 2019 3:51 pm
Hi Ben

PM sent
Hi Scott, Sorry I couldn't send you a list. I had requested an email address in my post so I can attach a list to it. I just got back to FL and they changed the format. Can't figure out things yet. Emails are easy for me. Regards, Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 12:17 pm

Larry LaPatka wrote:
Sat Jan 12, 2019 4:11 pm
requested a list twice over the last two weeks and still no reply.
Hi Larry, Sorry about that. I requested on my post that I would need an email address so I can attach a list to it. They changed the format on MTFCA ,and I am having a hard time figuring things out . My email is on the list benlefebre@juno.com .as soon as I get it ,i'll get it right out. Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 1:03 pm

Bill Anziani wrote:
Tue Jan 08, 2019 7:27 pm
Can you please send me a list as well
Hi Bill, You requested my list a while ago, but I need you to send me an email so I can attach it to it. I mentioned that in my original post. With this new format I can't figure out any other way. My email is benlefebre@juno.com Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 1:09 pm

Larry LaPatka wrote:
Sat Jan 12, 2019 4:11 pm
requested a list twice over the last two weeks and still no reply.
Hi Larry, Sorry about that. I need you to just send me an email and request the list benlefebre@juno.com . I mentioned it in my original post. When I came back to FL a while ago MTFCA had changed the format. I am having a hard time figuring it out. I'll send it right out when I receive it. Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 1:22 pm

Randy72 wrote:
Sat Jan 12, 2019 1:21 pm
PM sent. No reply yet
Hi Randy, Please send me your email address so I can attach the list to it. I mentioned that also in my post . send to benlefebre@juno.com MTFCA changed the format before I got back to FL, and I have a hard time figuring another way to do it. As soon as I get it ,i'll send it out. Thanks, Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 1:36 pm

Randy72 wrote:
Sat Jan 12, 2019 1:21 pm
PM sent. No reply yet
Hi Randy, I am not sure if I sent an email yet. But I need your email address in order to attach the list to it. I also mentioned it in my post. my email is benlefebre@juno.com .As soon as I get it,I'll send the list right out. Ben


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 1:46 pm

Michael Peternell wrote:
Tue Jan 08, 2019 9:14 pm
Not sure but I also asked for a list. Nothing so for.
Hope I'm not being farmed for email.
Hi Michael, Sorry if you didn't get your list yet. I mentioned in my original post that I need your email so I can attach the list to it.Thats the only way I find to do it since MTFCA changed the format from last year.As soon as I get it,it will be sent out. My email is benlefebre@juno.com Thanks, Ben


Tom
Posts: 3
Joined: Sat Jan 12, 2019 10:02 am
First Name: Tom
Last Name: Graves
Location: North Carolina
Board Member Since: 2016

Re: FS- Over 100 parts,tools, mostly T.List available

Post by Tom » Sun Jan 13, 2019 3:23 pm

Please send list tom@countryfreezers.com


Topic author
BenLefebre
Posts: 42
Joined: Sun Jan 06, 2019 10:32 pm
First Name: Reuben
Last Name: Lefebre
Location: Estero, FL 33928

Re: FS- Over 100 parts,tools, mostly T.List available

Post by BenLefebre » Sun Jan 13, 2019 3:48 pm

Sorry, on my recent FS post for the over 100 items I neglected to add my email address benlefebre@juno.com . Please use it when requesting the list.Sorry I don't PM's yet. Ben

Post Reply Previous topicNext topic