Page 1 of 1
Verify hardware size for a 12
Posted: Wed Feb 03, 2021 2:08 pm
by Tbird
Can anyone verify the thickness and diameter of the lock washers that went on the fender eye bolts for a 12?
Thanks
Mike
Re: Verify hardware size for a 12
Posted: Wed Feb 03, 2021 2:11 pm
by Rich Eagle
Here is a little about early ones:
http://www.mtfca.com/discus/messages/50 ... 1446921280
I hope someone has more.
Rich
Re: Verify hardware size for a 12
Posted: Fri Mar 05, 2021 10:04 pm
by Tbird
Found some thick spring washers
Re: Verify hardware size for a 12
Posted: Sun Mar 07, 2021 11:29 am
by Original Smith
The ones I've seen are much thinner than what's available today. Usually they are somewhat serrated as well.