Search found 124 matches

by havnfun
Fri Jan 29, 2021 10:13 pm
Forum: General Discussion Forum (started 2019)
Topic: Seeking opinions on 1912/13 oil pans
Replies: 15
Views: 712

Re: Seeking opinions on 1912/13 oil pans

My January 13, 1913 has the three rivet pan ears....
by havnfun
Mon Jan 25, 2021 7:39 pm
Forum: Classifieds - Parts
Topic: FS 12V starter + bendix
Replies: 14
Views: 1298

Re: FS 12V starter + bendix

I have bought several items from Bob and only have the best to say about him and everything I have purchased from him. Through our seller/buyer relationship, we have a long lasting friendship.
by havnfun
Sat Jan 09, 2021 5:03 pm
Forum: Classifieds - Parts
Topic: undercoat
Replies: 2
Views: 263

Re: undercoat

I sprayed undercoating on the underside of mine, this helps prevent dings that will cause immediate rusting to start and protects the top finish as well
by havnfun
Sat Jan 09, 2021 4:54 pm
Forum: Classifieds - Parts
Topic: FS set of RM brakes
Replies: 17
Views: 1026

Re: FS set of RM brakes

After talking with Johan, very nice person, these RMB are for the 26-27 wooden wheels, or one can add a small drum to the installation and use on a earlier rear end.
by havnfun
Sat Jan 09, 2021 4:23 pm
Forum: Classifieds - Parts
Topic: FS set of RM brakes
Replies: 17
Views: 1026

Re: FS set of RM brakes

If they're only large drum, I will buy them; please call me
by havnfun
Sat Jan 09, 2021 4:20 pm
Forum: Classifieds - Parts
Topic: FS set of RM brakes
Replies: 17
Views: 1026

Re: FS set of RM brakes

Jonah, one last question : if you flip the drums over is there also a small drum



.
by havnfun
Sat Jan 09, 2021 3:50 pm
Forum: Classifieds - Parts
Topic: FS set of RM brakes
Replies: 17
Views: 1026

Re: FS set of RM brakes

Can you supply more pictures
by havnfun
Fri Jan 08, 2021 11:50 am
Forum: Classifieds - Parts
Topic: FS Late runningboard brackets,very good condition.
Replies: 3
Views: 313

Re: FS Late runningboard brackets,very good condition.

Steve,

thanks for the education, I looked at my 27 and 23 and yes, the 27 have two holes on the other edge and the 23 has one..
by havnfun
Fri Jan 08, 2021 11:45 am
Forum: Classifieds - Parts
Topic: WTB - Original Brass Schrader Valve Stem Dust Covers - Found!
Replies: 10
Views: 441

Re: WTB - Original Brass Schrader Valve Stem Dust Covers

I have both old and two year old reproduction covers that fit the larger stems and also fit on Shrader rim nuts just fine....could there be something wrong with the covers you received or am I misunderstanding the issue here?
by havnfun
Tue Jan 05, 2021 11:51 pm
Forum: Classifieds - Parts
Topic: WTB K R Wilson Model T Main Bearing Facer & fillet Cutter
Replies: 5
Views: 392

Re: WTB K R Wilson Model T Main Bearing Facer & fillet Cutter

Mark,

Tim Hill - KRWilsontools.com sold all his collection the last few months on eBay, I purchased a facer & fillet cutter from him for the Model A. Tim is aware I'm looking for the Model T version if he runs across one.
by havnfun
Tue Jan 05, 2021 1:04 pm
Forum: Classifieds - Parts
Topic: WTB K R Wilson Model T Main Bearing Facer & fillet Cutter
Replies: 5
Views: 392

WTB K R Wilson Model T Main Bearing Facer & fillet Cutter

Howdy,

I am looking to buy a K R Wilson Model T Ford Main Bearing Facer & fillet Cutter
by havnfun
Sun Dec 27, 2020 6:32 pm
Forum: Classifieds - Parts
Topic: Stevens T-181 Thread chaser
Replies: 6
Views: 1054

Re: Stevens T-181 Thread chaser

Bill,
ISO 'In Search Of', you're just looking to see if anyone has one?
by havnfun
Thu Dec 24, 2020 12:43 am
Forum: Classifieds - Parts
Topic: WTB Original 1913 Hubcaps
Replies: 0
Views: 200

WTB Original 1913 Hubcaps

Howdy,

I'm looking for some decent original 1913 hubcaps to purchase!
by havnfun
Fri Dec 18, 2020 6:37 pm
Forum: Classifieds - Parts
Topic: Coil tester
Replies: 5
Views: 530

Re: Coil tester

John,

Having used both, Strobo-spark and ECCT, I ended up purchasing the ECCT and love my ECCT, especially using it with the advanced software.
by havnfun
Mon Oct 19, 2020 12:50 pm
Forum: Classifieds - Parts
Topic: All original 1913 touring for sale
Replies: 19
Views: 1636

Re: All original 1913 touring for sale

Sorry, I mean doors goes down to the splash aprons not running boards on 1913
by havnfun
Mon Oct 19, 2020 11:59 am
Forum: Classifieds - Parts
Topic: All original 1913 touring for sale
Replies: 19
Views: 1636

Re: All original 1913 touring for sale

1913 Doors goes down to the running board, no round corners on the bottoms
by havnfun
Sat Sep 12, 2020 9:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Even the Experienced Make Bad Decisions
Replies: 51
Views: 3102

Re: Even the Experienced Make Bad Decisions

Hank,

Thanks for posting and explaining everything, lots of newer owners/drivers DO NOT understand getting caught in Neutral and losing control.

Thank God no one was hurt other then feelings and some material metal that can be repaired.
by havnfun
Thu Jul 16, 2020 3:40 pm
Forum: Classifieds - Parts
Topic: Henry’s wonderful model T book
Replies: 1
Views: 484

Re: Henry’s wonderful model T book

Tom,

I sent you an email
by havnfun
Tue Jun 30, 2020 1:33 pm
Forum: Classifieds - Parts
Topic: FS Stewart 1913 Swivel Assembly with Road Gears SOLD.
Replies: 2
Views: 580

Re: FS Stewart 1913 Swivel Assembly with Road Gears.

Hank, That's very good price
by havnfun
Mon Jun 22, 2020 1:22 pm
Forum: Classifieds - Parts
Topic: WTB Mirrors
Replies: 3
Views: 1140

Re: WTB Mirrors

I'm still looking for one mirror and mounting bracket to buy....

thanks for looking
by havnfun
Mon Jun 08, 2020 5:56 pm
Forum: Classifieds - Parts
Topic: pair of 1914 windshield supports and hinges.
Replies: 8
Views: 1153

Re: pair of 1914 windshield supports and hinges.

Steve,

My mistake, I saw them and noticed the bend, it's on the other end on a 1913, the bend on the 1913 is by the hinges.

Thanks
Joe
by havnfun
Mon Jun 08, 2020 11:40 am
Forum: Classifieds - Parts
Topic: pair of 1914 windshield supports and hinges.
Replies: 8
Views: 1153

Re: pair of 1914 windshield supports and hinges.

Those look like 1913 supports
by havnfun
Sat May 09, 2020 9:14 pm
Forum: Classifieds - Parts
Topic: FS old signs mostly Ford
Replies: 8
Views: 1598

Re: FS old signs mostly Ford

Kim, sent you an email on the parts sign 17x24
by havnfun
Fri May 01, 2020 2:04 pm
Forum: Classifieds - Parts
Topic: WTB ball caps ( 4th. mains) for re-babbitting
Replies: 9
Views: 1430

Re: WTB ball caps ( 4th. mains) for re-babbitting

Sending four your way Gene
by havnfun
Fri Apr 03, 2020 9:33 am
Forum: Classifieds - Parts
Topic: FS- 4th main for core
Replies: 6
Views: 1197

Re: FS- 4th main for core

Scott,

Gene French sells re-Babbitt ones for $45 plus shipping, he will give you $5 core, this issue is postage, I have about six, I plan on rounding them up and shipping to Gene, just to get him more cores.
by havnfun
Tue Mar 31, 2020 12:37 pm
Forum: Classifieds - Parts
Topic: FS Stewart speedometer drives
Replies: 9
Views: 1721

Re: FS Stewart speedometer drives

Kim,

Sent you an email
by havnfun
Sun Mar 29, 2020 5:03 pm
Forum: Classifieds - Parts
Topic: KW Coil Box
Replies: 1
Views: 552

Re: KW Coil Box

Larry is this a reproduction or original
by havnfun
Thu Feb 27, 2020 9:26 pm
Forum: Classifieds - Parts
Topic: WTB Drain valve Kingston 4 ball carburetor
Replies: 4
Views: 656

Re: WTB Drain valve Kingston 4 ball carburetor

Stan,

Thanx, looking forward to installing once it arrives
by havnfun
Thu Feb 27, 2020 3:55 pm
Forum: Classifieds - Parts
Topic: WTB Drain valve Kingston 4 ball carburetor
Replies: 4
Views: 656

Re: WTB Drain valve Kingston 4 ball carburetor

I tried a Bendix bolt, it fits and screws in only about two threads, not sure if the Bendix bolts are 1/16 NPT? I didn't want to force it in, just tried by hand?
by havnfun
Thu Feb 27, 2020 2:25 pm
Forum: Classifieds - Parts
Topic: WTB Drain valve Kingston 4 ball carburetor
Replies: 4
Views: 656

WTB Drain valve Kingston 4 ball carburetor

Howdy,

I'm looking for the drain valve for a 1913 Kingston 4 ball Carburetor
by havnfun
Wed Feb 26, 2020 8:07 pm
Forum: Classifieds - Parts
Topic: WTB 1926-27 Roadster Deck Lid
Replies: 1
Views: 454

WTB 1926-27 Roadster Deck Lid

Howdy,


I'm looking to buy a 1926-27 Deck Lid for a Roadster, I have the Turtle Deck, the complete lid is missing, this is for my daughters 27 Roadster build
by havnfun
Wed Feb 26, 2020 12:39 am
Forum: Classifieds - Parts
Topic: WTB 1914 Engine Block
Replies: 5
Views: 1101

Re: WTB 1914 Engine Block

I hve a bare 1914 block, I believe it's casting date 10 11 13 with the screw in water plugs, I bought it last year when I bought my 1913 Runabout.
by havnfun
Wed Feb 26, 2020 12:03 am
Forum: Classifieds - Parts
Topic: Wanted: Person Seeking Side View Mirror
Replies: 9
Views: 1368

Re: Wanted: Person Seeking Side View Mirror

Here is the link to my original post looking for mirrors

viewtopic.php?f=5&t=5156
by havnfun
Tue Feb 25, 2020 11:42 pm
Forum: Classifieds - Parts
Topic: Wanted: Person Seeking Side View Mirror
Replies: 9
Views: 1368

Re: Wanted: Person Seeking Side View Mirror

Steve,

I was looking for a 1913 Rectangular Mirror, if you need pictures I can send you some
by havnfun
Fri Feb 07, 2020 2:06 pm
Forum: Classifieds - Parts
Topic: FS RUCKSTELL P211 BEARINGS
Replies: 2
Views: 550

Re: FS RUCKSTELL P211 BEARINGS

Mark sent you an email
by havnfun
Sun Feb 02, 2020 7:53 pm
Forum: Classifieds - Parts
Topic: Wanted 26-27 wire wheel hub puller
Replies: 8
Views: 1346

Re: Wanted 26-27 wire wheel hub puller

I use a cheap three jaw from Harbor Freight, works GREAT!
by havnfun
Wed Jan 29, 2020 10:49 pm
Forum: Classifieds - Parts
Topic: For Sale: 1913 Brass Kingston 4-ball Carb
Replies: 5
Views: 1076

Re: For Sale: 1913 Brass Kingston 4-ball Carb

Gene, send me a text or call me tomorrow, I would like to discuss with you.
by havnfun
Wed Jan 29, 2020 10:14 am
Forum: Classifieds - Parts
Topic: WTB Oil tail lamp and license bracket
Replies: 7
Views: 1163

Re: WTB Oil tail lamp and license bracket

Thanx everyone, Mike Bird had one I purchased made in Brass
by havnfun
Tue Jan 28, 2020 11:49 pm
Forum: General Discussion Forum (started 2019)
Topic: Transmission autopsy: Bad driving?
Replies: 33
Views: 4643

Re: Transmission autopsy: Bad driving?

Steve, Sorry about your misfortune, this thread has some very good to excellent responses. Thanks for posting pictures and information on your dilemma, hopefully this will help others learn and understand the inner working better. I know I have learned a few things from the comments, so thanks every...
by havnfun
Mon Jan 27, 2020 7:03 pm
Forum: Classifieds - Parts
Topic: Brass Never Out Bracket- FS
Replies: 2
Views: 569

Re: Brass Never Out Bracket- FS

I would like to buy the bracket
by havnfun
Sat Jan 25, 2020 10:57 pm
Forum: General Discussion Forum (started 2019)
Topic: Current Values of rebuildable Ruckstell
Replies: 15
Views: 2250

Re: Current Values of rebuildable Ruckstell

Thanx everyone for the comments, appreciate it, please continue, all comments welcome, please share your thoughts, opinions etc. I'm sure that there are folks wanting to sell and others looking to buy, my idea of this thread was to produce a good understanding of current supply and demand to help ev...
by havnfun
Sat Jan 25, 2020 8:07 pm
Forum: General Discussion Forum (started 2019)
Topic: Current Values of rebuildable Ruckstell
Replies: 15
Views: 2250

Current Values of rebuildable Ruckstell

Howdy, I'm trying to get some ballpark idea of the current values of a rebuildable complete Ruckstell rear end! I have a friend of friend that is trying to sell one and I want to be fair before I make an offer, I haven't seen it or know whether it is small or large drum. I need to sleep at night and...
by havnfun
Fri Jan 24, 2020 7:34 pm
Forum: Classifieds - Parts
Topic: Windshield to Firewall brackets F/S
Replies: 2
Views: 543

Re: Windshield to Firewall brackets F/S

Layden,

I sent you an email
by havnfun
Tue Jan 21, 2020 8:12 pm
Forum: Classifieds - Parts
Topic: WTB Oil tail lamp and license bracket
Replies: 7
Views: 1163

Re: WTB Oil tail lamp and license bracket

Steve,

Thanks for looking
by havnfun
Tue Jan 21, 2020 5:15 pm
Forum: Classifieds - Parts
Topic: WTB Oil tail lamp and license bracket
Replies: 7
Views: 1163

WTB Oil tail lamp and license bracket

I'm looking for an early Brass era Oil Tail lamp & license plate bracket... for my 1913 Runabout.
by havnfun
Wed Jan 01, 2020 6:36 pm
Forum: Classifieds - Parts
Topic: Rocky Mountain Brake pedal
Replies: 3
Views: 866

Re: Rocky Mountain Brake pedal

Attached picture shows the pedal Mark is mentioning NO CAMS, I purchased this car with this pedal and no brake band in the transmission, I have since installed a brank band and pedal with the cam.
by havnfun
Sun Dec 22, 2019 10:52 pm
Forum: Classifieds - Parts
Topic: Wanted: Top Iron Holder
Replies: 10
Views: 1550

Re: Wanted: Top Iron Holder

Steve,

A friend of mine has this one
by havnfun
Sat Dec 21, 2019 5:26 pm
Forum: Classifieds - Parts
Topic: For Sale: Model T Prestolite Running Board Acetylene Tank
Replies: 1
Views: 636

Re: For Sale: Model T Prestolite Running Board Acetylene Tank

May I suggest you take this bottle to your local Acetylene welding supply store to see if this bottle can be refilled?
by havnfun
Sat Dec 21, 2019 5:23 pm
Forum: Classifieds - Parts
Topic: FS Coil Tester
Replies: 8
Views: 3334

Re: FS Coil Tester

I own a ECCT with the Advanced software, love using this to setup coils and you will too.

Hopefully you will find one under your Christmas Tree this year.
by havnfun
Fri Dec 20, 2019 4:42 pm
Forum: General Discussion Forum (started 2019)
Topic: 1913 Runabout Top question
Replies: 13
Views: 1999

Re: 1913 Runabout Top question

Steve, I just got off the phone with Mike of Classtique, he does actually make a top off original pattern that he has, so thank you for suggesting him. It's amazing the vendors say NO to anyone making one, it's actually on Classtique's website and catalog that they make one, I learned something new ...
by havnfun
Thu Dec 19, 2019 4:31 pm
Forum: General Discussion Forum (started 2019)
Topic: 1913 Runabout Top question
Replies: 13
Views: 1999

Re: 1913 Runabout Top question

Steve, no I haven't called them as I was told by a vendor, they do not have plans for the 1913 Runabout, that's why they do not sell for 1913 Runabout? I could call them direct and see what they can do, Cartouche stated they would work with me, I could try a 1914 and they would be willing to make a ...
by havnfun
Thu Dec 19, 2019 3:28 pm
Forum: General Discussion Forum (started 2019)
Topic: 1913 Runabout Top question
Replies: 13
Views: 1999

Re: 1913 Runabout Top question

Larry, Thanks for you input and pictures, I am not into having my car judged and as for Authenticity, I'm OK with the top looking good and being functional. I will try a 1914 top, unless, there are plans that show the correct measurements for a 1913 Top. Possibly I could get a copy and send them off...
by havnfun
Wed Dec 18, 2019 9:24 pm
Forum: General Discussion Forum (started 2019)
Topic: 1913 Runabout Top question
Replies: 13
Views: 1999

Re: 1913 Runabout Top question

Mark,

Thanks for the links to some interesting reading...

RV Thanx for your input, aswell as Rich.
by havnfun
Wed Dec 18, 2019 2:13 pm
Forum: General Discussion Forum (started 2019)
Topic: monocle windshield.
Replies: 5
Views: 1211

Re: monocle windshield.

I have Plexiglas in mine, took it off and put a half windshield on the car, the Plexiglass heading into the sun is blinding, had to look around the window to drive.
by havnfun
Wed Dec 18, 2019 2:03 pm
Forum: General Discussion Forum (started 2019)
Topic: 1913 Runabout Top question
Replies: 13
Views: 1999

1913 Runabout Top question

Howdy, I have a 1913 Runabout, the vendors do not sell a top for this car, suggestion was to try a 1914 Runabout top. Has anyone any knowledge/experience with a 1913 Runabout top and trying the 1914 top? I thought about CarTouche making me a 1914 and leaving extra material along the outer edges, can...
by havnfun
Sat Dec 14, 2019 11:39 pm
Forum: Classifieds - Parts
Topic: Wanted
Replies: 7
Views: 1673

Re: Wanted

in the US the side is determined from sitting behind the steering wheel, facing forward, drivers side is the left side...
by havnfun
Wed Dec 11, 2019 9:10 pm
Forum: Classifieds - Parts
Topic: WTB: One, possibly two,1912 Heinze Coils
Replies: 6
Views: 1135

Re: WTB: One, possibly two,1912 Heinze Coils

There is one on ebay, I have no affiliation to the seller or item

https://www.ebay.com/itm/Model-T-Ford-1 ... SwjXZbwMsA
by havnfun
Wed Dec 04, 2019 10:51 am
Forum: General Discussion Forum (started 2019)
Topic: 5008CST Coil Point Adjusting Tool
Replies: 4
Views: 1145

Re: 5008CST Coil Point Adjusting Tool

This link should take you directly to the new tool
shop.modeltetimer.com/3-in-1-Coil-Adjusting-Tool-ADJTOOL.htm
by havnfun
Mon Nov 25, 2019 6:14 pm
Forum: Classifieds - Parts
Topic: WTB part for Holley Model S
Replies: 3
Views: 751

Re: WTB part for Holley Model S

Update:

Corey Walker in Texas took on this project, he made the broken part out of brass and has rebuilt the carburetor..
by havnfun
Sun Nov 24, 2019 10:31 pm
Forum: General Discussion Forum (started 2019)
Topic: Just hauled home 1911 runabout
Replies: 37
Views: 5359

Re: Just hauled home 1911 runabout

Congratulations, that is an excellent find, should bring you a lifetime of enjoyment, wishing you a successful hunt for the missing parts.
by havnfun
Sat Nov 23, 2019 6:23 pm
Forum: General Discussion Forum (started 2019)
Topic: Pick up HCCT in Roseville Ca I live in Nampa Id
Replies: 11
Views: 2125

Re: Pick up HCCT in Roseville Ca I live in Nampa Id

Ron,

Thanks for your input, I passed it along to the seller
by havnfun
Sat Nov 23, 2019 1:45 pm
Forum: General Discussion Forum (started 2019)
Topic: Pick up HCCT in Roseville Ca I live in Nampa Id
Replies: 11
Views: 2125

Re: Pick up HCCT in Roseville Ca I live in Nampa Id

Thnx everyone, the Issue is resolved,

Mark,

Thanks for the idea of disassembling, the seller was able to remove the flywheel, coil ring and magnets, going to ship it in several boxes, the flywheel I have several on hand
by havnfun
Fri Nov 22, 2019 10:49 am
Forum: Classifieds - Parts
Topic: WTB part for Holley Model S
Replies: 3
Views: 751

WTB part for Holley Model S

Help!!!!!

I need a part for my Holley model S 1913 two screw carburetor, pictures attached showing the part
by havnfun
Thu Nov 21, 2019 7:53 pm
Forum: General Discussion Forum (started 2019)
Topic: Pick up HCCT in Roseville Ca I live in Nampa Id
Replies: 11
Views: 2125

Re: Pick up HCCT in Roseville Ca I live in Nampa Id

Bill is correct, I'm trying to arrange direct Pickup and transportation as the current owner will not ship. I haven't purchased it as yet, trying to resolve transportation prior to agreeing to purchase.

Thanks in advance
by havnfun
Thu Nov 21, 2019 11:38 am
Forum: General Discussion Forum (started 2019)
Topic: Pick up HCCT in Roseville Ca I live in Nampa Id
Replies: 11
Views: 2125

Pick up HCCT in Roseville Ca I live in Nampa Id

Hi anyone coming from California going through Roseville Ca and heading east through Idaho? I would like to arrange pickup of a HCCT, I can meet with you on the road, depending your route

Best Regards,

Joe
by havnfun
Sun Nov 10, 2019 11:30 am
Forum: General Discussion Forum (started 2019)
Topic: Mystery solved! Found these in the oil change today
Replies: 17
Views: 3300

Re: Mystery solved! Found these in the oil change today

Very interesting and educational topic, I followed along and had no idea until the mystery was solved.

Thnx everyone for the comments and Jeff for finally posting Mystery Solved...
by havnfun
Fri Nov 08, 2019 7:04 pm
Forum: General Discussion Forum (started 2019)
Topic: Saw this on Facebook...Thoughts?
Replies: 15
Views: 2693

Re: Saw this on Facebook...Thoughts?

Perry,

The picture you posted is of Gary McNary in a top hat, member of the WIMTC in his 23 Speedster. He lives in Nampa Idaho and was competing in a 4x4 event a few years ago.

Best Regards
by havnfun
Sun Oct 27, 2019 11:34 am
Forum: General Discussion Forum (started 2019)
Topic: Finally back in the road!
Replies: 15
Views: 2306

Re: Finally back in the road!

Jeff, Congratulations on getting George back on the road, as I remember he was all apart when I was there last month, it was an interesting discussion we had about the damage, including the two piece piston... I'm really thinking about using the needle bearings for the triple gears, that is a perfec...
by havnfun
Thu Oct 03, 2019 3:31 pm
Forum: Classifieds - Parts
Topic: WTB Mirrors
Replies: 3
Views: 1140

Re: WTB Mirrors

.
by havnfun
Fri Sep 13, 2019 10:21 am
Forum: Classifieds - Parts
Topic: For Sale: NEW Model T Ford Top Iron Kit - 26/27 Roadster **Sold**
Replies: 7
Views: 1311

Re: For Sale: NEW Model T Ford Top Iron Kit - 26/27 Roadster **Sold**

Hank, Jeff,

Thanks a lot for your support, I really appreciate the trust and effort, especially the help when knowing I'm in need of a certain item and you both worked to make it happen.

Thanks MTFCA
by havnfun
Sun Aug 04, 2019 5:53 pm
Forum: Classifieds - Parts
Topic: 1926-1927 Roadster/Roadster Pick Up Top LIKE NEW
Replies: 2
Views: 790

Re: 1926-1927 Roadster/Roadster Pick Up Top LIKE NEW

Hi Charlie, are you selling the bows with it? or just the top
by havnfun
Sat Aug 03, 2019 10:47 pm
Forum: General Discussion Forum (started 2019)
Topic: How to tell if lacquer was applied to a brass radiator
Replies: 24
Views: 3554

Re: How to tell if lacquer was applied to a brass radiator

I used Aircraft paint remover on these lights, took if off in seconds and washed off with water. The one on the top is uncleaned the bottom with the clear whatever removed, then I later polished them up nicely.
by havnfun
Wed Jul 31, 2019 12:32 am
Forum: General Discussion Forum (started 2019)
Topic: Is this an early 1926 Roadster PU or Runabout
Replies: 7
Views: 1877

Re: Is this an early 1926 Roadster PU or Runabout

havnfun wrote:
Wed Jul 31, 2019 12:24 am
Donnie, hope these help, let me know if you would like more. Sorry for the pictures being sideways, it's an iPhone thing I guess. I can take better pictures of the firewall tomorrow during the day..
by havnfun
Wed Jul 31, 2019 12:24 am
Forum: General Discussion Forum (started 2019)
Topic: Is this an early 1926 Roadster PU or Runabout
Replies: 7
Views: 1877

Re: Is this an early 1926 Roadster PU or Runabout

Donnie, hope these help, let me know if you would like more. Sorry for the pictures being sideways, it's an iPhone thing I guess. I can take better pictures of the firewall tomorrow during the day..
by havnfun
Tue Jul 30, 2019 9:11 pm
Forum: General Discussion Forum (started 2019)
Topic: Timer question
Replies: 10
Views: 1941

Re: Timer question

Tim,

I'm guessing since I cannot see the fan assembly and complete adjustment bracket, it looks like you have the wrong fan adjustment bracket.
by havnfun
Tue Jul 30, 2019 8:51 pm
Forum: General Discussion Forum (started 2019)
Topic: Is this an early 1926 Roadster PU or Runabout
Replies: 7
Views: 1877

Re: Is this an early 1926 Roadster PU or Runabout

Dan, thanks for your response and picture.
by havnfun
Tue Jul 30, 2019 8:46 pm
Forum: General Discussion Forum (started 2019)
Topic: Turn signal wiring diagram - am I going crazy?
Replies: 9
Views: 1940

Re: Turn signal wiring diagram - am I going crazy?

directional diagram.png
directional diagram.png (259.69 KiB) Viewed 1931 times

Hope this helps
by havnfun
Mon Jul 29, 2019 12:14 am
Forum: General Discussion Forum (started 2019)
Topic: Lever won’t stay put
Replies: 9
Views: 2008

Re: Lever won’t stay put

There are also wood blocks you can add to the gas and spark levers rods on the outside of the firewall to hold them in place, the vendors sell them. you can probably google about the blocks, simply add mtfca to your google search. there are many folks that show how to make your own..
by havnfun
Sun Jul 28, 2019 12:42 pm
Forum: General Discussion Forum (started 2019)
Topic: Have you had a drum failure ? POLL
Replies: 47
Views: 5664

Re: Have you had a drum failure ? POLL

Yes, one Friends Reverse drum and he uses Kevlar, having said that, his driving methods are more questionable, then material used. another friends Low drum, he had some sort of wood or something else with something like clothe material together making up the band material I've also taken about 5 old...
by havnfun
Sun Jul 28, 2019 12:18 pm
Forum: General Discussion Forum (started 2019)
Topic: Is this an early 1926 Roadster PU or Runabout
Replies: 7
Views: 1877

Re: Was this body a Roadster PU

Here is a picture of the inside, visibly there are no brakets to bolt a deck to!

If more pictures of different areas are needed, I will be happy to take them and upload.
by havnfun
Sun Jul 28, 2019 12:07 pm
Forum: General Discussion Forum (started 2019)
Topic: Is this an early 1926 Roadster PU or Runabout
Replies: 7
Views: 1877

Is this an early 1926 Roadster PU or Runabout

Looking to learn if this body is actually a early 26 Roadster PU body. It had a pickup box on it, seller wouldn’t part with the pickup box. Only sold this body, no holes in back of quarter panels for Turtle Deck.
by havnfun
Tue Jul 23, 2019 6:52 pm
Forum: General Discussion Forum (started 2019)
Topic: KW Coil Box Id
Replies: 8
Views: 1567

Re: KW Coil Box Id

Gene,

Here is a complete discussion around the K-W Coils and box

http://www.mtfca.com/coils/Coils.htm
by havnfun
Thu Jul 18, 2019 1:39 pm
Forum: Classifieds - Parts
Topic: WTB Mirrors
Replies: 3
Views: 1140

Re: WTB Mirrors

.
by havnfun
Thu Jul 11, 2019 9:18 pm
Forum: Classifieds - Parts
Topic: WTB Mirrors
Replies: 3
Views: 1140

WTB Mirrors

I’m looking for a set of 1913 mirrors

Thanks
by havnfun
Tue Jul 02, 2019 9:56 pm
Forum: General Discussion Forum (started 2019)
Topic: Any 1913 Runabouts in Idaho or close by
Replies: 4
Views: 1049

Re: Any 1913 Runabouts in Idaho or close by

Hi Rich, Thanks, I purchased mine a month or so ago in California, it's going to be a winter project, needing upholstery, top and complete check over, your about four hours from me and if I don't find one closer by fall. I will contact you and do a road trip to visit, chat and look at your BEAUTIFUL...
by havnfun
Tue Jul 02, 2019 8:28 pm
Forum: General Discussion Forum (started 2019)
Topic: planning to drive your T on July 4?
Replies: 26
Views: 4208

Re: planning to drive your T on July 4?

Planning on doing the Homedale Idaho parade at 9am, then going to Wilder Idaho for the 11am parade, the clubs theme there will be in honor of a founding brother Pete Burril who passed this past year, Theme 'For Pete's Sake" his hometown was Wilder Idaho.


Best
by havnfun
Tue Jul 02, 2019 7:25 pm
Forum: General Discussion Forum (started 2019)
Topic: Any 1913 Runabouts in Idaho or close by
Replies: 4
Views: 1049

Re: Any 1913 Runabouts in Idaho or close by

Wayne,

Thanks he is a four hour ride, well within a days drive there and back..
by havnfun
Tue Jul 02, 2019 7:03 pm
Forum: General Discussion Forum (started 2019)
Topic: Any 1913 Runabouts in Idaho or close by
Replies: 4
Views: 1049

Any 1913 Runabouts in Idaho or close by

Hi,

I'm looking for anyone close to Nampa idaho that has a 1913 Runabout, I have some questions and would like to be able to visit and see in person if possible.

Best
by havnfun
Sun Jun 23, 2019 10:57 am
Forum: Classifieds - Parts
Topic: WTB 1926-27 Front fenders
Replies: 1
Views: 731

WTB 1926-27 Front fenders

We are looking for a nice set of front fenders and splash aprons for my daughters and son in law build project, a 1927 Roadster PU. It’s a family project that we have been building together for over a year now. My daughter is getting excited more and more each day. Hopefully she will be able to take...
by havnfun
Sat Jun 01, 2019 10:47 pm
Forum: General Discussion Forum (started 2019)
Topic: Unknown rear fender came in Model T lot
Replies: 5
Views: 1708

Re: Unknown rear fender came in Model T lot

I just acquired a set for my daughters 1927 Roadster PU project, which are identical to your fender...
by havnfun
Wed May 15, 2019 6:05 pm
Forum: Classifieds - Vehicles
Topic: Wanting to Buy: 1913-1915 Runabout project car
Replies: 7
Views: 2645

Re: Wanting to Buy: 1913-1915 Runabout project car

My search is over, I purchased a 1913 Runabout

Thanks
MTFCA