MTFCA Forum

Fellas, do your family & yourself a favor and fill this out.

I’m Amanda Fowler — the daughter of a classic car collector and a Classic Car Concierge.
I’ve helped families sell everything from beautifully restored classics to dusty barn finds, and let me tell you — the hardest part isn’t the sale… it’s the missing info.

That’s why I created this...

 
I thought I would post this here as well as in the main forum.

As many of you know, I repair meters for HCCTs (Hand Crank Coil Testers). What I do is a very small niche of the Model T hobby. I got into this because the person that was doing it many years ago passed. There was quite a gap until I was convinced (actually conned) to take up the...

Single car transportation in 20 ft covered trailer from Northwest to Hershey. Also, will haul parts and chassis. Leaving Seattle area end of of September. Very fare pricing, fuel is not cheap. Contact number is 360 271 7780 ask for Ray

WANTED
Can someone recommend someone who can make a cushion like the one pictured at a reasonable price? Rough dimensions are pictured but I'm no DaVinci. Whomever does the job can use the existing cushion for more accurate measurements.
It's for my 1923 ALF Brockway Torpedo.
I'm in the Detroit area.
Thanks

Looking for someone close to me with a Stevens Tool that can rebuild my 11 T front axle yoke. I’m located in the York, Lancaster, Hershey area of Pennsylvania.
Keith Billet
Wrightsville,PA

Any suggestions for the beat type of paint to use to get close to original look?

I would like to buy a complete running engine to fit in my 1915 touring. Bob in Virginia

All,

I got permission from Suzanne to post this information. Bud Williams has retired. Suzanne Williams (Bud's daughter) and her son, Aaron, are now running the business.

Rocky Mountain Brake Co.
612 Willoughby Ln.
Stevensville, MT. 59870

NEW Rocky Mountain Brakes and parts can be purchased by calling Suzanne at 406-802-4658 or through email at...

We have room for another project here now. Can take in one whole car restoration or 1-2 engine only rebuilds. No wait list.

The only float valve on the market that flows as well or better than Henry's original.

If you wonder if they work, simply ask the guy who just passed you.

Email for details - I do not monitor this closely enough to answer questions promptly

standard vs full flow.jpg

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal...

Repair and Refurbish Amp and Volt Meters for HCCT's.
Some parts available
Jewell and Weston meters

Bob Cascisa
RMC Engineering Services LLC
Poulsbo, WA

big-meters@comcast.net
360-620-3226
 
Ford HCCT.jpg

Weston.JPG

Jewell Meters.jpg

Jewell.jpg

Progress update:
The Laser metal cutter is FIXED! I had to order replacements for several burned out parts in the servo control board, but this old man has't lost his touch when it comes to fixing power supplies...

Cutting parts today and tomorrow.
Greenshot 2023-08-17 11.42.01.png
Here are some pretty cool Videos of the laser metal cutter in...

OK everyone, I’m looking for something a bit out of the ordinary. I’m looking for someone, preferably on the west coast (southern half of California) who is very knowledgeable about early T’s (preferably has worked/restored one or more) who would consider taking on the task of putting one together.

When I say early this is a 2 lever 2 pedal...

Do you have to constantly fiddle with the ignition coils to keep your Model T car running properly? I can assure you this is not normal operation for a Model T Ford. Unreliable engine performance, hard starting and poor idling are commonly caused by poorly operating or adjusted ignition coils.
Over the last 35 years I have rebuilt over 26,000...

Im looking for a company in Ohio that rebuilds magneto coils. Does anyone know who they are?

I need to know if anyone knows of a company who can do a short run of special Model T dust pan to frame bolts. These were used on the early cars in the teens. The part number is 3088, and is 1/4-28 X 9/16. The head and nut are 3/8 square, and there is a cotterpin hole at the bottom. I don't believe anyone is reproducing this part.

I sold Tim a starter and he filmed a little video of how it arrived and all the surprises I include for free!

Jeff

May 28th

Leaving Mt. Pleasant, South Carolina
Headed to Earlville, Illinois

Room for a Model T or
other items in my enclosed trailer

Here is my route

IMG_5935.jpeg

Call or Text

FreighTer Jim
260-804-6695

****************************************

Google “ Model T Transport … 💡

E505186B-2C58-45A3-91E4-3B581F52056E.jpeg

You...

I have a T engine near St. Paul Minn. I need moved to Cleveland Oh. , or closer to it. Let me know if you can help.

Thanks Tom

I have a T engine near St. Paul Minn. I need moved to Cleveland Oh. , or closer to it. Let me know if you can help.

Thanks Tom

Am now making flappers for the Simmons carburetors! Our prototype is complete and is working excellent! We’ve installed the carb on a 1926 model T and he results are an engine that now isles at just under 100 RPM’s! If interested message me at 412-354-2843 text only. I’ll send a video of this engine in operation! We will be manufacturing the...

Static balancer from Tooele UT 84074 to Folsom CA 95620. Weight 123 lbs on cut down pallet 40 x 27 x 13
Richard Gould
rgould1910 at comcast.net

Is there anyone in North East Ohio that babbitts model T engines.
440.286.1876

I would like to introduce my transport services here on MFTCA . My equipment is a 24ft enclosed and I also have a
28ft enclosed with 82' at the door opening with escape door with winch. I pull with a 21 Ram 3500 diesal dually .
I have been servicing the classic and antique hobby for about 4 years now . After retiring from about 35 years...

At the end of July / first of August, I want to get two (2) T's, both brass era tourings, transported to Rochester, NY.

I'd like for the trailer to be tall enough for the cars to ride with their tops up.

One of the T's can ride with it's top down, but the other, a '14, has never had it's top lowered since it's restoration was finished in 1995....

Looking to transport a Chevy C10 pick up truck from Melbourne Florida 32904 to landisburg Pa17040. I'm very flexable as to when. I would like it gone before end of July

Is there anyone in Salt Lake that doe's repair & maintenance on model Ts? I have a friend that wants to get a T to keep in Salt Lake to take his
Grandkids out in. He has one here and they love going for rides with Grandpa But their in Utah most of the time. He is a great guy to work with
but once in a while needs some help with his T.
Thanks...

I have developed a benchtop tester which fully simulates the performance of the timer / coil ignition system, including operation on magneto voltage on the Model T. The system can measure the performance of any timer running on battery or magneto at any desired rpm. In addition, the system can drive a set of four coils and the behavior of each...

Gen III Antique Auto is re-opening it's doors. Soup to nuts restoration services for Model T's.

email: Gen3AntiqueAuto@gmail.com

*no soup will be provided

i am offering my Home rebuilder bearing service again ... this is for pouring and lineboring the mainbearings in Model A and Model T Ford mainbearings only ...this requires a completely disassembled and cleaned motor block , mainbearing caps and bolts and your re-ground or new crankshaft ... i will pour babbitt and linebore the mains , cut oil...

I had a T that did not have a title so it was sort of a big problem here in Missouri. I had been reading about having it registered in Vermont where you can register a vehicle even though you are not a resident. I got a Bill of Sale, filled out the Vermont paperwork, paid the Vermont sales tax and three weeks later I had a Vermont registration (no...

I will be giving a presentation at the Winter Workshop at McPherson College on January 20, 2024 discussing the performance of a variety of Model T timers and the behavior and tuning of coils. I have developed a benchtop tester which fully simulates the performance of the timer / coil ignition system, including operation on magneto voltage. The...

1912 Torpedo
New body by The Craftsman of California mounted on clean good running 1920 chassis. Engine was redone and has about 2-3000 miles on it.

Has original bows and tattered top, original steering wheel with new wood, original coil box refinished,,
Trunk box, new firewall refinished, new hardwood floorboards, early aluminum hogshead, (4)...

Hey everyone, I’m looking for a source in the Orange County NY area who can install a new top on a 1924 touring. Upholstery is out of my league.

Any leads would be appreciated - thanks!

Curious if mtfca members are having any difficulty reaching one of our advertisers, Classtique Upholstery. Neither web address they have listed is up right now, nor is the phone number listed in the latest Vintage Ford a working number currently. I have emailed Mike, and I was able to leave a message on the 800 number listed. So far, no response....

Hershey AACA Fall Meet is approaching. We do not bringing regular reproduction items to sell on the field. We want to show off and sell some of the wonderful used items that Don Lang has had hidden away for many years. We will be bringing a large array of Used and New Old Stock items to sell as well as your pre-orders. So this means if there is...

Folks contact me about shipping parts
and other items but I am not always
available to transport
what they need moved …

I have heard good things about YRC Freight:

@

FJ

Whis is making the finger joint box for a repop KW Coil?
Thank you
Jon Crane
cranejon@hotmail.com

Hey all,

I am restoring my fathers 1927 Model T. I have done the work to the engine, frame, rear end, etc. The issue I have is the body. I am not an auto body person. I have been calling around trying to get someone to do the body work. Collision shops are not interested and if I go to a place with restoration in their name the price sky rockets....

I am restocked with just enough components to build 25 new McLaren Wire Wheels. These are the last that I will be able to offer without having to raise prices dramatically. As we all know it has been a very big challenge to get clincher rims. I can produce 30x3.5 and a limited number of 30x3 clincher wire wheels. Since I have everything in my shop...

Ray Wells (AKA the craftsman) can rebuild your original or build you a new one. He has built well over 800 bodies. Call him with your needs or questions at 1-619-447-9558. His shop is in El Cajon, CA.

NH Full Flow Float valves in stock

No more obsolete parts being made for sale. Only new NH Full Flow Valves are in production.

Last of these kinds of parts are now gone:
Stromberg OF slow and high speed valves.png

Does anyone know of service help i can get in colorado, fixing things that i can't do myself?

I’ll be going from West Winfield NY to Lancaster Ohio sometime between March 18 and 25. I’ll have an empty F250 and 16’ car trailer. Returning with a small car on trailer. Will transport out and have some room in truck on return trip. Contact me if you need something moved to Ohio or to central NY or points in between. Reasonable rate. Thanks.

Anybody from new york going to chickasha oklahoma swap meet

I am in need of transport for two Firestone rims from Chickasha to Utah. If Utah is either your destination or on your route home, and you have a little extra room, drop me a text or email.
Al
alsfarms@hotmail.com

My son has just moved from the Bay Area of California to near Lewiston Idaho. He has a Corvair Ultravan. This is a small camper built by Chevrolet Corvair. He says it has a 30' wheel base. Do you have anything which can haul a vehicle like that. It is in running condition so will not need to be winched. However it is about 900 miles and not sure...

Anyone know of a good radiator shop with experience to re-core a Model T Brass radiator and make a neat job please

I have a repair service up and running for folks who need starter and generators repaired. Even if you just need a snout reconditioned or a commutator turned. I also make copper starter posts, field coils and other various items for effecting repair of these units.

After about 5 years in climate controlled storage I am looking to get my 1917 Touring road trip worthy. It was running off battery when I stored it, was fine for cross-town jaunts, but magneto was failing and it needed new bands. It also needs a new canvas top. Looking to upgrade to Rocky Mountain brakes , fix a badly leaking axle, also leaking...

Is there anyone that can rebuild a rear taper leaf spring?

I bought this spring disassembled, but it appears undamaged and complete; it has seven leaves.

I can strap the pieces to a pallet and ship it to you.

Any help is appreciated.

Thank you.

Bill Everett

bill.everett@epickett.com

I will have a position on the 24ft enclosed out Wisconsin or surrounding area week of Sept 8th .Looking to head east or mid Tennessee area/north Alabama area Thanks Dave 724 815 6266

I need transportation for 5 wire wheels, 4 have tires mounted and have hubs. From Hayward, CA. to Friday Harbor, WA north of Seattle. Any where close to Seattle would be a plus and save me a trip to CA. Glad to pay for gas.

Jim

We need to transport Jim Eck's 1926 Model T from Grand Forks ND to Avon IN.
My wife is trying to get her dad's car to its new home.
Transport date is flexible.

I already know it could be a challenge. I'm looking for options to accomplish this goal.
I'm trying to avoid transport brokers.

Thank you,
Fred Richardson
317-451-8092

Hi,
Youtube channel for parts repair Ford Model T.
Casting and machining bearings, flame spraying shafts, flame welding castings, engine repair, rear axle repair.
Starter and alternator repairs.

but just a hobby not a businnes.

Markus

I would like to begin this topic by Introducing myself and services .I have just signed up to MTFCA . I was introduced to it by Bill's Autoworks .
I am a H.A.M.B and AACA member .I have been providing enclosed transport services for about the last 2 years . I have transported many
classic's antiques to include an antique harley. I have also...

Hello, I’m looking for someone that can transport a set of fenders, running boards and aprons from Papillion Nebraska 68046 to Rochester Michigan 48306. Thanks for any help or suggestions.

We offer this service of resurfacing mag fields.
No more struggling with uneven air gaps get it right the first time.
Contact us by phone 508-460-0733 or email sales@jandm-machine.com

I will be performing a magnet recharging service to those in need. Contact me first to see what my schedule is at the below address's. They must be removed from the flywheel, cleaned and do a ring test by holding at the center vee and striking on a vise to hear it ring like a tuning folk. Package well with bubble wrap in a flat rate box. You will...

I will in the near future be doing driveshaft, torque tube, and radius rods re-angled/shortening for those requiring it for auxiliary transmissions. Parts must be cleaned or I charge an extra fee, like $80.00. Shipping to and from my zip 37380 is on you so a prepaid label for the return is in order, less 5 lbs weight. Contact me first prior to...

Five Rebuilt Ford Script Coils.JPG

Have your ignition coils rebuilt by someone with over thirty years’ experience.
I have expanded the window to accommodate rebuilt coils as a Christmas gift.
Coils received in my shop between December 15, 2021 and January 31, 2022 will enjoy the benefit of free Priority Mail return shipping to USA addresses.
If...

Matching or nearly matching set of Stromberg MB-1's, sold as original equipment on several overhead conversions in the mid to late 20's as they will bolt right to the head on several different models. Easy to adjust, trouble free and -- probably more important then than now -- easy to start. Some of the carbs in those days had terrible starting...

Hi folks. I have tooling for rebuilding front axles and steering assemblies. I check to see if axle is bent, put new bushings in front axle, new bushings in spindles, spindle arm bushings, I can do spring bushings too. Need new wheel bearings? How about a repair on your hub cap threads?

My shop is about 30 minutes north of Detroit, Michigan (via...

Good Grief...

The poor guys looking for a rivet, an axle rebuild or whatever have their ads buried in just a couple weeks.

With some multiple postings only 4 days apart, I think everyone knows about car hauling and who to call or not.

Is this REALLY how the Services page was intended to be? A constant, regurgitation of the same service dozens...

Hi all, anyone in the Northern Virginia or DC metro area that does front axle repairs? I bought new spindles, bushings, etc. Or perhaps someone who rents all the tools? Thank you!

Anyone know of a re-Babbitt service near Frederick co Maryland? Looking to have a T block done.

Just inspected the first samples of the Vane Actuators from a new run. The workmanship, quality and machining tolerances are all excellent with window edge to window edge machining tolerances well within the specified +/- 1 degree tolerance. This is very important because it determines the cylinder to cylinder ignition timing accuracy and...

Rebuilt spindles and steering arms. New bushings installed and reamed. $170 outright sale, $140 exchange plus flat rate shipping. USA only
Hershey C4Y-34-37

Come see me at the Pre War Swap Meet in March 19-20th. Pre-order your drums and save on shipping costs. Stop by and say Hi . Hope to see you at this great event! Website:
davesrestoration.machine@gmail.com or call: 740-360-1904

Model T friendly and knowledgeable. Extensive rivet catalog. Excellent service, great prices. Speak to Jim

I have a 27 that needs upper and lower king pin inserts on the right side.
I don't have the tools, so I would need to buy all that just for one repair.
It would suit me better if I could bring the axle somewhere and have it done.
I can remove the axle and bring it to a shop within a couple hundred miles or so.
My zip is 26105 (Parkersburg, WV;...

Any one have 4 or 5 Model A 21” wire wheels?
Need some to finish a project.
Call 423.237.8846 or 423.623.5656
Thanks
Larry LaPatka
Parrottsville, Tennessee.

I just purchased a rebuilt starter from Ken Seiler who’s located in Texas and highly recommend his products! I couldn’t find one through the conventional Model T suppliers as they were out and uncertain when they’d be restocked. I discovered Ken on eBay (ahs0106) and he sent me MTFCA member David Tagert as a reference. David provided a glowing...

We built a hack type body but we made the cab a little small and with the covid stay at home orders i got a bit larger and can't fit behind the steering wheel, is there anyone who can cut about 4 inches out of the steering column and reweld it ?.
Thanks
Rick Goelz
Knoxville,Tn.