MTFCA Forum

Model T Ford Classifieds on facebook, just saw a nice set. just be careful lots of fraud.

Is it usable and how much would you want? Thank you

Wanted: I am in need of a 09-16 cylinder head water outlet. Original or reproduction, going on my speedster.
Thanks

Hi Ed, I would like to purchase the horn. Let me know how you would like payment. Also sent you a PM thanks.

You tube has a real good video for coil box and other model t restoration projects

Check speedway motors, they have brass ford scripts..Speedway Motors part #91112801
Ford Script Emblem, Polished Brass $31.99 each

There are many on ebay. i purchased one from a gentleman who rebuilds them and it ran great. he goes by A-redneck, I believe he has one up for auction currently.

Hi Mark, I will take the adaptor set, PM sent

With your add stating you would trade for a 14-15 brass t, I am figuring that you are looking to spend around 15k. Good Luck. You probably be lucky to get someone to paint it for that price in So.Cal. With assembly, a good upholster and the paint in Southern Ca. your probably looking to spend at lea...

Since I am getting rid of the mag on the car I am installing oil slappers. My question is, how many oil slapper would you use, 2,4,6 or 8. Wondering if to many slappers will increase the pressure and not enough will not move the oil.

Thanks in advance

your float is probably stuck open. years of build up.

sold, pending payment...thankyou

For Sale: Pattern for a Rootlieb Speedster firewall. Everything been figured out for you. Just trace it on your firewall that you have from your Rootlieb speedster kit, drill and bolt. Took me 3 tries to make it so I could do this without screwing up mine. Pattern is made from 3/4 finished pine plyw...

I use it on all of the cars I have rebuilt and love the stuff. First, prime and paint the underneath then you can use the rattle can undercoating or bed liner. It will help protect your fenders from rock stars.

Is the radiator support rod for a rootlieb speedster with brass radiator the same as the torpedo roadster or cars with wood firewall? thank you

Sold to Craig pending payment, thank you...email sent to you Craig

for sale, front and rear shackles set, no bushings, only used to roll car in shop, $45.00 includes shipping lower 48

EMail Ken Buhler ,vintintin360@gmail.com, he has tons of parts restored and unrestored and lives in Kelowna BC, or send him a pm thru this site. great guy to work with. probably has your needs

max cylinder wear that I have gone with is 60 over.

Looking for a easy dimension/picture of the lowered steering column going thru the firewall for a rootlieb speedster. Size of hole, distant to center from edge, you know. I know they specify that the bottom left bolt hole is the top of the firewall bracket. Just would like to verify before I drill. ...

Sold pending payment, Rich check your email please. thank you

Yes, the sleeve over the handle turns and is not sloppy.

For Sale, Nice Hand crank ratchet with claw and spring. Nice and straight $55.00 includes shipping in lower 48

: c4.jpg (50.15 KiB) Viewed 798 times

sold pending payment, Mark, please check your email..thank you

For Sale..Texas T/Birdhaven Distributor with extra points, coil, condensers, rotor, cap and plug/coil wires. Only used to start a car and decided to go with coils and timer. THIS IS A 12 VOLT SETUP. $320.00 shipped to your door in the lower 48.

: dist4.jpg (57.43 KiB) Viewed 503 times

sold, pending payment, thank you

sold to morgan, pending payment, please check your email, thank you

move to the top with a new price

Weekend special,how about $25 plus shipping

For Sale..Pair of small emergency brake drums $25 plus shipping

: hub3.jpg (46.13 KiB) Viewed 576 times

For Sale..Pair of 26-27 running board bracket, good condition, $30 plus shipping

Gear box is sold pending payment

move to the top with a new price

move to the top with a new price

Switch in pending sale to Miles, thank you....Miles please check your g-mail

Thanks Tim, I am surprised it has not sold yet. I am building my last car and will not need this part no longer.

move to the top

thanks Allan

For Sale 15-16 brass steering gear case
$30 plus shipping

For Sale... 19-25 ignition switch, original plate, switch and meter, has a reproduction pin type back plate with new tumbler from langs with 2 keys. All taken down to bare metal, primed, painted and tested for continuity, ready to install. $165.00 shipped anywhere in the lower 48. switch1.jpg switch...

sold, pending payment, thank you

For Sale, Kingston carburetor. Completely dismantled and cleaned, new float seat and needle, new spray needle and painted with gas resistant paint. $130.00 includes shipped to your door in lower 48 states. king1.jpg king2.jpg king3.jpg king4.jpg Friday special, $115.00 shipped to you in lower 48 st...

move to the top

How about $115.00 shipped to you in the lower 48

Being in the San Diego area, your best bet is to go to small local shops where you live, escondido etc. bigger shops are going to charge you 5 thousand or more. Many shops will not even touch your car if you just want them to paint only. You also, if you know anyone, could go to TJ. Lots of good pai...

For Sale, Kingston carburetor. Completely dismantled and cleaned, new float seat and needle, new spray needle and painted with gas resistant paint. $130.00 includes shipped to your door in lower 48 states.

Just the way you did.

What a steal for someone

So far I see most people prefer the E Timer, but when I checked on the web page there is nothing in stock. Are they still in business?

I am building my last model t, it is going to be a 15 speedster. I have eliminated the mag and i am changing to 12 volt system. My question is..... Would you go with a distributor, either from model t ranch style or bosch style, or would you go with a coil box and 4 coils and a timer? Looking for pe...

First, use a grease and wax remover, do not try to sand first. Second, wet sand using a 400 grit paper until you get a uniformed dull finish. third, any bare or pitted spots use a rustoleum fill primer, spot the area, wet sand and repeat until it feels nice. fourth, touch primer area with spray pain...

Chidgey has been doing this for decades, they are great

Chidgey & Son
4.4(5) · Metal finisher
El Cajon, CA
Open ⋅ Closes 4 PM · (619) 441-2505,

carburetor is Pending payment, thank you

back to the top, time to sell it, $160.00 includes shipping to the lower 48

Nikko012 wrote: ↑
Wed Jan 17, 2024 12:25 pm
Is it still for sale

email sent to you, carbs will be marked sold pending payment, thank you

Both straight thru carbs are sold pending payment, thank you

Both straight thru carbs are sold pending payment, thank you

Both straight thru carbs are sold pending payment, thank you

For sale, Holly nh, reconditioned needle with new seat, new float valve with viton tip needle and spring, painted black $185 includes shipping to lower 48

FS, Holly straight thru, all redone, new needle and seat, viton tip float valve and seat new drain, nut and spring..$295 shipping included to lower 48, Clear coated body and black bowl.

: carb1.jpg (28.71 KiB) Viewed 872 times

: carb3.jpg (26.41 KiB) Viewed 872 times

: carb4.jpg (31.76 KiB) Viewed 872 times

For Sale, Holly straight thru. All redone with new float, needle and seat, drain and nut, spring, air valve, has Scott Congers full float valve and needle installed. $320 shipping included to lower 48

box is sold, thank you

no longer for sale, thank you

For Sale, brass steering gear box and cover, cleaned, sanded and buffed, looks nice $110 includes shipping in mainland usa.

move to the top

sold pending payment, thank you and merry christmas

dinosbunny wrote: ↑
Fri Dec 15, 2023 12:54 pm
For Sale, Brass gear box and cover, $100 plus shipping, Yes, I know it is not the correct lid for the box, but it is all that I have left and will look great on a speedster.
brass3.jpg
brass2.jpg
brass1.jpg

For Sale, Brass gear box and cover, $110 includes shipping in mainland usa, Yes, I know it is not the correct lid for the box, but it is all that I have left and will look great on a speedster.

For Sale, later coil box, nice, straight both latches on lid work fine. $60.00 includes shipping in the mainland states

For Sale- nice steering column, has been dismantled, polished brass, new springs, original 15-16 style control rods and steering box. Lower timing rod lever has not been pinned for installing but comes with pin and lever. $275.00 plus shipping.

Kim, I will take the straight thru please. Email sent

would like to see a couple more pics of the body/interior and motor please

the body style is the same for LATE 23-25, same cowl, firewall, hood, top irons and fenders if you are a purest, then no, it would not be a 25 because of the framing. But I can bet $20 that most do not have a totally original model t, If we are to be that picky.

body is sold pending, thank you

For Sale, Everyone has seen it, here is the temptation price $2000.00 Completely restored body with hood and floor boards.

sorry, wheels are sold pending payment, add moved by mistake

to the top again

lets go to the top please

wire wheels are sold pending payment, thank you

For Sale, Four wire wheels with hubs, front hubs have NEW inner/outer race (installed), NEW inner and threaded outer bearings, NEW seals, NEW cad lug nuts and 4 brand NEW universal black-wall tires with tubes. Tires and tubes still in wrapper-- Bearings have been greased but never run-- SOLD pending...

For Sale, Four wire wheels with hubs, front hubs have NEW inner/outer race (installed), NEW inner and threaded outer bearings, NEW seals, NEW cad lug nuts and 4 brand NEW universal black-wall tires with tubes. Tires and tubes still in wrapper--
$1600.00

For Sale, Late 23-25 touring body, all new wood, no cancer in the sheet metal, comes with a hood and all the floor boards, ready to bolt on your chassis, last best price before I repaint it next year and yes, the price will be much more. $2500.00

back to the top

Dino, I agree with Jerry. I like the wire wheels, but a 21x4.4/5 wire wheel has too much tire for a brass era speedster. There are lots of options out there. Pasco, Hayes, Buffalo, Bud... These 30x3-1/2 Hayes demountables are surplus to my needs. 20211107_111638.jpg Let me know if you are intereste...

lets go to the top for the weekend

Mark Gregush wrote: ↑
Fri Oct 13, 2023 12:23 pm
Personally, I would go with the 26/27 wire wheels if you have the hubs to go with them. While wood would look more antique, the wires would maybe look more sporty.

Thanks Mark

Which wheels do you prefer on a brass speedster, demountable wood or 27 wire wheel type. Yes I know either are correct for a brass car but I am going for looks and smiles plus a have a full set of each and I am going to get rid of one or the other. So, tell me what you think.
Thanks
Dino

Jack Putnam, in Ohio wrote: ↑
Mon Oct 09, 2023 8:34 pm
Where. Is the body located?

Dallas, Oregon 14 miles west of Salem

back to the top with a new price for this week

the model a is sold

lets move it to the top for the weekend

Thanks Keith

New Price-For Sale Late 23-25 Model T Touring Body with hood, all new wood done by Ray Wells,( the craftsman), body has been completely reworked including sandblasting any cancer was cut out and replaced. Epoxy primed and painted with a single stage paint. All brackets are in and floor boards are in...

I will take the carb, pm sent

sold pending payment, thank you

Sold, pending payment, Thank you

Sold pending payment

move to the top

For Sale, nice 23-25 windshield complete with stanchions, modern glass and mirror, the glass is siliconed in place of brass channel.
$375 plus shipping.

: w1.jpg (39.73 KiB) Viewed 452 times

wheels are on sold pending payment

FS I have 2 rear and 1 front 23 demountable never used wood wheels. These wheels are oiled, primed then painted red. The front has new inner and outer race installed. All the hubcaps threads have been chased. Wood was redone by Daves wood wheels in Brea CA. I had 2 fronts but dropped one and bent th...

Search found 186 matches